Untitled Document
5515-G
Moisture sensor, surface mount, gray, 10 ft. lead
The 5500 Series moisture detector is designed to respond to the presence of water and other nonflammable conductive liquids. The sensor units can be surface-mounted or floor-mounted beneath carpet for detection of increased moisture levels in basements and bathrooms, and leakage in air conditioning and sprinkler systems. The moisture detectors work with the 5501 Moisture Processor. Simply push the processor's test switch to simulate the presence of water and verify proper operation. The processor accommodates up to four detectors and comes with two internal lithium batteries for long-life
Features:
* Detects presence of water
* Ideal for basement and ceiling applications
* Easy installation
* No external power required
* End-user test certifies sensor operation
Technical Specifications
- Alarm On Time-10 sec. delay, then on as long as wet
- Battery Life[Nominal]-10.0 yr
- Battery Type-Lithium
- Cable length-100 ft. max.
- Color-Gray
- Depth[Nominal]-0.6 in
- LED Indicator-Flashes every 2 sec. on alarm
- Length[Nominal]-3.9 in
- Loop Configuration-Closed Loop
- Loop Resistance[Nominal]-1.0 MOhm
- Operating Temperature[Minimum]-33.0 °F
- Operating Temperature[Maximum]-180.0 °F
- Resistance[Nominal]-10.0 Ohm
- Resistance w/ Alarm[Nominal]-1.0 Ohm
- Sensing Circuit-AC to eliminate electrolysis (1 Hz)
- Sensor Isolation From Ground-Photo Coupled
- Test Button-Simulates moisture for test
- Trigger Resistance[Nominal]-500.0 kOhm
- Width[Nominal]-0.7 in
