Loading...

Comnet CNFE4FX2TX2US 4-Port 100 Mbps Unmanaged Switch (2TX, 2FX)

Comnet   |   SKU: CNFE4FX2TX2US   |   Model: CNFE4FX2TX2US

Product Highlights

Comnet CNFE4FX2TX2US 4-Port 100 Mbps Unmanaged Switch (2TX, 2FX)

This item is discontinued. Replacement: CNGE6FX2TX4POE

Comnet CNFE4FX2TX2US 4-Port 100 Mbps Ethernet Unmanaged Switch; 2 TX, 2 FX.

The ComNet(tm) CNFE4US Ethernet 4 port unmanaged switch Series is designed to transmit and receive 10/100 Mbps data over optical fiber through user selectable SFP options or 10/100 Mbps data over CAT5E/6 electrical cable. This unit integrates 4 independent 10/100 Mbps channels in a single package. The CNFE4FX2TX2US and CNFE4FX4US require the ordering of sold-separately interchangeable SFP modules for fiber type, distance and connectors. The CNFE4FX2TX2US and CNFE4TX4US electrical interfaces will Auto-Negotiate to 10 Mbps, or 100 Mbps Ethernet rate without any adjustments. The optical interfaces operate at a 100 Mbps Ethernet rate. All models are environmentally hardened to operate in demanding environments. LED indicators are provided for confirming equipment operating status. Packaged in the exclusive ComNet ComFit housing, these units may be either wall or rack-mounted, or may be DIN-rail mounted by the addition of ComNet model DINBKT1 adaptor plate.

Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.

Features & Benefits

  • Two (2) 10/100 BASE-T/TX electrical ports
  • Two (2) 100 BASE-FX optical ports
  • Electrical ports support Auto-Negotiation for 10 Mbps or 100 Mbps, full duplex or half duplex data.
  • Optical port supports 100 Mbps full duplex data
  • Automatic MDI/MDI-X crossover
  • Uses interchangeable SFP for fiber type, distance and connector
  • Voltage transient protection on all power and signal input/output lines
  • No in-field optical adjustments required
  • LED Indicators for Power and Activity
  • IEEE 802.3 compliant
  • Hot-swappable rack modules
  • Interchangeable between stand-alone or rack mount use -- ComFit
  • LIMITED LIFETIME WARRANTY

Similar Switches

Card Cages

*Note: SFP Modules Sold Separately

Downloads

Condition New
Brand Comnet
NDAA Compliance No
Item Type Network Switch
Technology Digital - IP
Environment Hardened
Data Rate 10/100 Mbps
Ports 4-Ports
Fiber Mode Varies by SFP
Management Unmanaged
Connectors RJ-45, SFP
Form Factor ComFit, Wall
PoE Class Non-PoE
Switch Fabric Unspecified
# of Ports 4 PORT
Data Rate 10/100 Mbps
Management Unmanaged
Form Factor Rackmount
PoE No
Features Rugged / Hardened
Comnet CNFE4FX2TX2US 4-Port 100 Mbps Unmanaged Switch (2TX, 2FX)
  • (1) Ethernet Switch
  • (1) Power Supply
  • (1) Installation Manual
  • LIMITED LIFETIME WARRANTY

Comnet CNFE4FX2TX2US 4-Port 100 Mbps Ethernet Unmanaged Switch; 2 TX, 2 FX.

The ComNet(tm) CNFE4US Ethernet 4 port unmanaged switch Series is designed to transmit and receive 10/100 Mbps data over optical fiber through user selectable SFP options or 10/100 Mbps data over CAT5E/6 electrical cable. This unit integrates 4 independent 10/100 Mbps channels in a single package. The CNFE4FX2TX2US and CNFE4FX4US require the ordering of sold-separately interchangeable SFP modules for fiber type, distance and connectors. The CNFE4FX2TX2US and CNFE4TX4US electrical interfaces will Auto-Negotiate to 10 Mbps, or 100 Mbps Ethernet rate without any adjustments. The optical interfaces operate at a 100 Mbps Ethernet rate. All models are environmentally hardened to operate in demanding environments. LED indicators are provided for confirming equipment operating status. Packaged in the exclusive ComNet ComFit housing, these units may be either wall or rack-mounted, or may be DIN-rail mounted by the addition of ComNet model DINBKT1 adaptor plate.

Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.

Features & Benefits

  • Two (2) 10/100 BASE-T/TX electrical ports
  • Two (2) 100 BASE-FX optical ports
  • Electrical ports support Auto-Negotiation for 10 Mbps or 100 Mbps, full duplex or half duplex data.
  • Optical port supports 100 Mbps full duplex data
  • Automatic MDI/MDI-X crossover
  • Uses interchangeable SFP for fiber type, distance and connector
  • Voltage transient protection on all power and signal input/output lines
  • No in-field optical adjustments required
  • LED Indicators for Power and Activity
  • IEEE 802.3 compliant
  • Hot-swappable rack modules
  • Interchangeable between stand-alone or rack mount use -- ComFit
  • LIMITED LIFETIME WARRANTY

Similar Switches

Card Cages

*Note: SFP Modules Sold Separately

Downloads

Condition New
Brand Comnet
NDAA Compliance No
Item Type Network Switch
Technology Digital - IP
Environment Hardened
Data Rate 10/100 Mbps
Ports 4-Ports
Fiber Mode Varies by SFP
Management Unmanaged
Connectors RJ-45, SFP
Form Factor ComFit, Wall
PoE Class Non-PoE
Switch Fabric Unspecified
# of Ports 4 PORT
Data Rate 10/100 Mbps
Management Unmanaged
Form Factor Rackmount
PoE No
Features Rugged / Hardened
Comnet CNFE4FX2TX2US 4-Port 100 Mbps Unmanaged Switch (2TX, 2FX)
  • (1) Ethernet Switch
  • (1) Power Supply
  • (1) Installation Manual
  • LIMITED LIFETIME WARRANTY

Customers also viewed

Check items to add to the cart or select all