The WM3026 wall mount has been designed specifically for use with Pelco's heavy-duty pan/tilts and/or enclosures. Manufactured from 0.25-inch (6.35 mm) aluminum, the WM3026 is capable of supporting a maximum load of 300 pounds (136.08 kg) and can be safely mounted to any vertical load-bearing surface. The WM3026 includes an adjustable mounting head, built-in pan/tilt adapter and gusset for added support. This flexible design allows you to simply remove the adjustable head for heavy-duty pan/tilt applications -- no special mounting adapters are required. In addition, the gusset can be utilized for mounting a standard receiver in close proximity to the camera, enclosure, and/or pan/tilt. In addition, the two 3/4-inch NPT threaded holes on the sides of the mount arm will accommodate flexible metal conduit in applications where cabling must be installed externally to the mounting surface.
![]() |
Pelco WM3026 Installation Manual (Size: 42 KB) | |
![]() |
Pelco WM3026 Spec Sheet (Size: 862 KB) |
See any errors on this page? Let us know.
| Manufacturer | Pelco |
| Condition | New |
| Item Type | Enclosure Mounts, Pan/Tilt Mounts |
| Mounting Surface | Wall |
| Camera Mounting | Pan/Tilt Assembly |
| Outdoor Use | Yes |
| Construction | Aluminum |
| Finish | Gray |
| Load Capacity | Up to 300 Lbs. |
| Features | Cable Feed-through, Conduit Access |
No questions asked yet
© 2000-2013 123SecurityProducts.com, Inc. All rights reserved. Privacy Policy
Loading...