Geovision 140-GVPAD-W00 GV-Pad IP Signal Decoder with 13-Inch Display
Product Highlights
The 140-GVPAD-W00 is a panel device that decodes and displays incoming IP streams from GeoVision and third-party IP devices. It is light-weighted and requires only minimal amount of installation. As a standalone device, the GV-Pad is self equipped with a display screen and supports almost all the features of a GV-IP decoder box. Through the network, a GV-Pad can receive and manage up to 64 IP streams. The administrators can monitor channels, take snapshots of critical moments and pause at a specific channel when events occur, all through the supplied remote control. GV-Joystick can be installed to control GeoVision and third-party PT / PTZ / speed dome cameras.
- Decode video streams in H.264 codec at a maximum frame rate of the IP device
- Decode up to 5 megapixel IP cameras
- Decode up to 64 IP streams
- Automatically search for ONVIF IP devices
- Support for 3rd party IP cameras that adhere to RTSP, ONVIF or PSIA
- Single View and Quad View in sequential display
- Support for 10/100 Ethernet over LAN
- Support for Wi-Fi
- Support for GV-Joystick control of GeoVision and third-party PT, PTZ and Speed Dome cameras
- Support for remote firmware upgrade, IP address configuration and addition of new channel
- Display of Matrix view through GV-Mobile Server
- IR remote control
- SD/SDHC card and USB drive for snapshot storage and firmware upgrade
Condition | New |
---|---|
Brand | Geovision |
Alarm I/O | 2/2 |
The 140-GVPAD-W00 is a panel device that decodes and displays incoming IP streams from GeoVision and third-party IP devices. It is light-weighted and requires only minimal amount of installation. As a standalone device, the GV-Pad is self equipped with a display screen and supports almost all the features of a GV-IP decoder box. Through the network, a GV-Pad can receive and manage up to 64 IP streams. The administrators can monitor channels, take snapshots of critical moments and pause at a specific channel when events occur, all through the supplied remote control. GV-Joystick can be installed to control GeoVision and third-party PT / PTZ / speed dome cameras.
- Decode video streams in H.264 codec at a maximum frame rate of the IP device
- Decode up to 5 megapixel IP cameras
- Decode up to 64 IP streams
- Automatically search for ONVIF IP devices
- Support for 3rd party IP cameras that adhere to RTSP, ONVIF or PSIA
- Single View and Quad View in sequential display
- Support for 10/100 Ethernet over LAN
- Support for Wi-Fi
- Support for GV-Joystick control of GeoVision and third-party PT, PTZ and Speed Dome cameras
- Support for remote firmware upgrade, IP address configuration and addition of new channel
- Display of Matrix view through GV-Mobile Server
- IR remote control
- SD/SDHC card and USB drive for snapshot storage and firmware upgrade
Condition | New |
---|---|
Brand | Geovision |
Alarm I/O | 2/2 |