Altronix AL1024ULM 5 Output Power Supply/Charger 24VDC
Product Highlights
AL1024ULM multi-output access control power supply/charger is specifically designed for use with access control systems and accessories.This unit converts a 115VAC, 60Hz input into five (5) individually protected Class 2 Rated power limited 24VDC outputs. Each output will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. These outputs will operate in both Fail-Safe and Fail-Secure modes. Controlled trigger input is achieved through normally open (N.O.) or normally closed (N.C.) supervised input or the polarity reversal from an FACP (Fire Alarm Control Panel). A form "C" dry output relay enables HVAC Shutdown, Elevator Recall or it may be used to trigger auxiliary devices.
Input:
- Input 115VAC, 60Hz, 4.2 amp.
- Input fuse rated @ 3.5 amp/250V.
- Fire Alarm Panel or Access Control System trigger inputs. N.O. or N.C. supervised trigger input and polarity reversal trigger input.
Output:
- 24VDC outputs.
- 10 amp supply current.
- Five (5) PTC protected Class 2 Rated power limited outputs, rated @ 2 amp.
- Output relay energizes when unit is triggered (form "C" contact rated 1 amp @ 28VDC).
- Filtered and electronically regulated output.
- Short circuit and thermal overload protection.
Battery Backup
- Built-in charger for sealed lead acid or gel type batteries.
- Automatic switch over to stand-by battery when AC fails.
- Maximum charge current 0.7 amp.
Supervision
- AC fail supervision (form "C" contacts).
- Notification trigger is selectable for 30 seconds (factory set) or 6 hours.
- Low battery supervision (form "C" contacts).
- Battery presence supervision (form "C" contacts).
- Power fail supervision relay (form "C" contacts).
Downloads
Condition | New |
---|---|
Brand | Altronix |
Power Supply Type | Cabinet, Wall Mount |
# of Outputs | 5 |
Output Protection | PTC |
Input Voltage | 115 VAC |
Output Voltage | 24 VDC |
Output Current | 10.0 Amp |
Features | UL Listed |
Output Type | DC |
Fire Alarm Interface | Yes |
Certifications | CSFM, MEA, UL |
Power Options | 10 amp @ 24VDC |
Output Protection | PTC |
Number of Outputs | 5 |
Input Voltage | 115VAC |
Version | Indoor Wallmount |
Battery Charging | Yes |
AL1024ULM multi-output access control power supply/charger is specifically designed for use with access control systems and accessories.This unit converts a 115VAC, 60Hz input into five (5) individually protected Class 2 Rated power limited 24VDC outputs. Each output will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. These outputs will operate in both Fail-Safe and Fail-Secure modes. Controlled trigger input is achieved through normally open (N.O.) or normally closed (N.C.) supervised input or the polarity reversal from an FACP (Fire Alarm Control Panel). A form "C" dry output relay enables HVAC Shutdown, Elevator Recall or it may be used to trigger auxiliary devices.
Input:
- Input 115VAC, 60Hz, 4.2 amp.
- Input fuse rated @ 3.5 amp/250V.
- Fire Alarm Panel or Access Control System trigger inputs. N.O. or N.C. supervised trigger input and polarity reversal trigger input.
Output:
- 24VDC outputs.
- 10 amp supply current.
- Five (5) PTC protected Class 2 Rated power limited outputs, rated @ 2 amp.
- Output relay energizes when unit is triggered (form "C" contact rated 1 amp @ 28VDC).
- Filtered and electronically regulated output.
- Short circuit and thermal overload protection.
Battery Backup
- Built-in charger for sealed lead acid or gel type batteries.
- Automatic switch over to stand-by battery when AC fails.
- Maximum charge current 0.7 amp.
Supervision
- AC fail supervision (form "C" contacts).
- Notification trigger is selectable for 30 seconds (factory set) or 6 hours.
- Low battery supervision (form "C" contacts).
- Battery presence supervision (form "C" contacts).
- Power fail supervision relay (form "C" contacts).
Downloads
Condition | New |
---|---|
Brand | Altronix |
Power Supply Type | Cabinet, Wall Mount |
# of Outputs | 5 |
Output Protection | PTC |
Input Voltage | 115 VAC |
Output Voltage | 24 VDC |
Output Current | 10.0 Amp |
Features | UL Listed |
Output Type | DC |
Fire Alarm Interface | Yes |
Certifications | CSFM, MEA, UL |
Power Options | 10 amp @ 24VDC |
Output Protection | PTC |
Number of Outputs | 5 |
Input Voltage | 115VAC |
Version | Indoor Wallmount |
Battery Charging | Yes |