Bosch B465-SR-1640 Universal Dual Path Communicator Kit

The B465-SR-1640 simulates dial tone and line voltages when the digital dialer has a report to send. The module simulates a PSTN connection to the central station. The module decodes the control panel’s PSTN dialer report and sends the decoded reports by IP connection using Bosch’s Conettix Protocol to the Conettix D6600, D6100IPv6, or D6100i Communication Gateway/Receiver (referred to as the receiver). When the receiver acknowledges receipt of the message, it sends an acknowledgement report to the module which in turn sends an acknowledgement to the connected control panel. This process maintains true end-to-end security. The B465 Conettix Universal Dual Path Communicator converts the Public Switch Telephone Network (PSTN) digital dialer, or dry contact outputs from an intrusion/ fire control panel to an IP signal for transmission over the Ethernet or cellular network. The B465 Conettix Universal Dual Path Communicator is UL 864 10th Edition approved per NFPA 72 version 2013. The module can use its built-in Ethernet connection, and/or an optional Conettix plug-in cellular module (B440/B441/B442/B443) to send reports to the central station receiver. Automation programming for the supported control panel remains unchanged with the installation of the B465 module, thus simplifying the installation process This allows for a smooth transition from the PSTN realm into IP. All messages generated internally by the B465 are shown in Contact ID format at the central station. The module can be powered from a 16.5 VAC transformer or 24 VDC power supply.

The B11R Small Control Panel Enclosure is a red enclosure made of cold-rolled steel that is 0.7 mm (23 gauge) thick. It houses many different Bosch control panels and modules. The enclosure holds one battery (up to 7 Ah).

The D101 is a lock and key set.

The D1640 is a transformer.

The D8004 Transformer Enclosure protects the AC plug in transformer and ensures that it remains securely fixed to the AC wall outlet. The D8004 Transformer Enclosure may be required for certain applications, the most common being fire alarm.

B465-SR-1640 Features

Compatible with any control panel using Contact ID, SIA, Pulse 3/1 or Pulse 4/2 communication formats (auto detecting)
No control panel reprogramming required to install
Supports Ethernet directly and optional plug-in cellular communication technologies in single, or multi-path
configurations
Supports four configurable inputs and three configurable outputs
Approved for Commercial Fire/Burglary applications as sole, primary, or secondary communication path