Optex BX-80NRi Wireless Barrier Outdoor PIR with Inovonics Tx

Optex BX-80NRi | Outdoor | Common causes of false alarms such as RFI and unwanted sunlight can be greatly reduced by patented Double | Slim and stylish. Buy Now.

The iSeries BX-80NRi from Optex is a wireless-ready, outdoor detector that provides the stability and reliability necessary for an outdoor PIR sensor. The iSeries version comes with an Inovonics EN1941 transmitter and battery pre-installed and allows installers to save valuable installation time and labor costs because no trenching, installing conduit or pulling wire is required. With long, narrow detection areas that extend from both its sides, the battery-powered BX-80NRi is specifically designed to be wirelessly wall-mounted centrally on a building. This unique detection pattern covers the building perimeter with a multi-layered, horizontal barrier that detects intruders before they break in. To help reduce false activations, the range can be adjusted so that detection extends only to the end of the building. The unit also has a size-judging function, which helps it discriminate between large and small objects within the detection area.

When a general-purpose mechanical security system is installed, detectors are usually located inside a building. In order to increase the effectiveness of such a security system, Optex recommends not only securing the inside of the building but also adding protection to the outside areas.

By adding BX-80NRi, it detects intruders before entry. This invisible barrier offers the first line of defense to a property's boundary.

Unique Detection Range:

Optex's advanced PIR technology creates a narrow, 24m long detection area that protects wide horizontal areas, such as a building's perimeter.

Limited Detection Range:

The detection range of the BX-80NRi can be adjusted to avoid detecting unwanted objects outside of the detection area.

Size Judging function:

The BX-80NRi only triggers alarms when both upper and lower detection layers detect movement.

False Alarm Reduction:

Patented Double Conductive Shielding Technology helps reduce false alarms caused by car headlights and reflected sunlight in particular.

Advanced Temperature Compensation:

The BX-80NRi uses advanced temperature compensation to automatically increase the detector's sensitivity under high temperature conditions, especially where the background temperature ranges from 35-37 degree C, close to that of the human body.

Battery Operation:

Battery operated unit gives convenient and simple installation. The BX-80NRi is a battery operated model and therefore requires no complicated wiring. It saves installation time and cost. Moreover, the BX-80NRi with flexible features can be added on to any wireless system which has already been installed. In addition, this unit is effective with transmitters and receivers from all manufacturers.

Advanced Battery Lead:

The BX-80NRi can be powered by battery of transmitter. By using for the attached battery lead, the battery power from transmitter can be shared with BX-80NRi and also low battery signal can be monitored by control panel.