Flir FC-669-ID-N 640 X 480 Outdoor Network Thermal Camera, 9mm Lens, 30HZ, NTSC
Product Highlights
The FC-669-ID-N from Flir is a 640 x 480 Outdoor Network Thermal Camera, 9mm Lens, 30HZ, NTSC. The Elara FC-Series ID combines best-in-class thermal image detail and high-performance edge perimeter analytics in a single device that delivers optimal intrusion detection in challenging environments and extreme conditions. Elara FC-Series ID cameras feature on-board video analytics optimized for FLIR’s thermal sensors. Easy to set up and capable of classifying human or vehicular intrusions, Elara FC-Series ID cameras provide reliable detection with very few false alarm rates, all without human intervention.
Features
Reliable Onboard Analytics
Accurately classify humans and vehicles.
- Auto calibration for depth setup for a simple and reliable configuration
- No additional measurement tools are needed, requiring only a single installer on site
- Allows analytics in corridor mode, reducing the number of cameras and improving the total cost of ownership
- Target hand-off to PTZ camera auto-tracking
Industry Leading Image Quality
Crisp, Clean Imagery for Unmatched Video Analytics Performance & Reliability.
- Superior image quality in low-contrast conditions
- FLIR’s custom AGCs provide images with extremely high contrast
- Dynamic Detail Enhancement (DDE) creates sharp edges and contrast that improve analytics performance
High Performance Lenses
Wide Range of Lenses for Optimal Detection Ranges in All Conditions.
- Choose from 17 high-performance lenses suitable for any perimeter or open area, including QVGA from 4° to 69° fields of view and VGA from 8° to 90° fields of view
- High performance optics deliver clear thermal video
Condition | New |
---|---|
Brand | Flir |
NDAA Compliance | No |
Protocols | IPV4, HTTP, Bonjour, UPnP, DNS, NTP, RTCP, TCP, UDP, ICMP, IGMP, DHCP, ARP, FTP, RTP/RTSP, Unicast/ Multicast, TCP/IP, HTTP, IEEE 802.1X |
Power Consumption | Heater off POE: <5.5W, POE+: <5.5W, 12VDC: <5.5W, 24VDC: <5.5W, 24VAC(VA): <8W, Heater on (@ 100%) POE+: <25W, 12VDC: <25W, 24VDC: <25W, 24VAC(VA): <32W |
Operating Temperature | -50°C to 70°C/-58°F to 158°F (Continuous Operation), -40°C to 70°C /-40°F to 158°F (Cold Start) |
Operating Humidity | 0-95% relative humidity |
Signal System | NTSC |
Lens Size | 9mm |
Camera Signal | Network IP |
Lens Type | Fixed |
Angle of View | 69° × 56° |
Weatherproof | IP66 & IP67 |
Video Output | 1Vp-p (PAL or NTSC), 1 x BNC 75Ω |
Infrared Distance | Non Infrared |
Resolution | 640 X 480 (Thermal) |
Connection Type | Wired |
Image Pixels-Effective | 307,200 pixels |
Dimensions (W x H) | 282 x 129 x 115 mm/11.1” x 5.1” x 4.5” |
Durability | Weather Resistant |
Mount Type | Bracket Required |
ONVIF | Yes |
Heater & Fan | Yes |
Auto Gain Control | Yes |
The FC-669-ID-N from Flir is a 640 x 480 Outdoor Network Thermal Camera, 9mm Lens, 30HZ, NTSC. The Elara FC-Series ID combines best-in-class thermal image detail and high-performance edge perimeter analytics in a single device that delivers optimal intrusion detection in challenging environments and extreme conditions. Elara FC-Series ID cameras feature on-board video analytics optimized for FLIR’s thermal sensors. Easy to set up and capable of classifying human or vehicular intrusions, Elara FC-Series ID cameras provide reliable detection with very few false alarm rates, all without human intervention.
Features
Reliable Onboard Analytics
Accurately classify humans and vehicles.
- Auto calibration for depth setup for a simple and reliable configuration
- No additional measurement tools are needed, requiring only a single installer on site
- Allows analytics in corridor mode, reducing the number of cameras and improving the total cost of ownership
- Target hand-off to PTZ camera auto-tracking
Industry Leading Image Quality
Crisp, Clean Imagery for Unmatched Video Analytics Performance & Reliability.
- Superior image quality in low-contrast conditions
- FLIR’s custom AGCs provide images with extremely high contrast
- Dynamic Detail Enhancement (DDE) creates sharp edges and contrast that improve analytics performance
High Performance Lenses
Wide Range of Lenses for Optimal Detection Ranges in All Conditions.
- Choose from 17 high-performance lenses suitable for any perimeter or open area, including QVGA from 4° to 69° fields of view and VGA from 8° to 90° fields of view
- High performance optics deliver clear thermal video
Condition | New |
---|---|
Brand | Flir |
NDAA Compliance | No |
Protocols | IPV4, HTTP, Bonjour, UPnP, DNS, NTP, RTCP, TCP, UDP, ICMP, IGMP, DHCP, ARP, FTP, RTP/RTSP, Unicast/ Multicast, TCP/IP, HTTP, IEEE 802.1X |
Power Consumption | Heater off POE: <5.5W, POE+: <5.5W, 12VDC: <5.5W, 24VDC: <5.5W, 24VAC(VA): <8W, Heater on (@ 100%) POE+: <25W, 12VDC: <25W, 24VDC: <25W, 24VAC(VA): <32W |
Operating Temperature | -50°C to 70°C/-58°F to 158°F (Continuous Operation), -40°C to 70°C /-40°F to 158°F (Cold Start) |
Operating Humidity | 0-95% relative humidity |
Signal System | NTSC |
Lens Size | 9mm |
Camera Signal | Network IP |
Lens Type | Fixed |
Angle of View | 69° × 56° |
Weatherproof | IP66 & IP67 |
Video Output | 1Vp-p (PAL or NTSC), 1 x BNC 75Ω |
Infrared Distance | Non Infrared |
Resolution | 640 X 480 (Thermal) |
Connection Type | Wired |
Image Pixels-Effective | 307,200 pixels |
Dimensions (W x H) | 282 x 129 x 115 mm/11.1” x 5.1” x 4.5” |
Durability | Weather Resistant |
Mount Type | Bracket Required |
ONVIF | Yes |
Heater & Fan | Yes |
Auto Gain Control | Yes |