The CL-80 is a stand-alone digital keypad for access control applications. This unit is weather-resistant (IP54) for outdoor / indoor use. It activates a built-in, high-powered relay and operates from a 12/24 V AC or DC power supply.
The CL-80 permits up to 56 individual access codes. Authorized users can be assigned specific codes for use in access control applications such as electrical switching and arming/disarming alarm systems. Unauthorized entry is prevented by a penalty timer that locks the keypad for 30 seconds after three consecutive invalid code entries. A special request-to-exit input is provided, so that the door can be opened from the inside of the protected area without a code.
In addition to access control, the CL-80 can be integrated with an alarm system for enhanced security. The tamper switch output can trigger the alarm system, if an attempt is made to open or remove the unit from the wall. An ambush digit may be programmed and entered as a suffix to the code. The panic output can activate the alarm in case of panic or under duress. By assigning a special code, an auxiliary output can be used to either arm or disarm the alarm system or to activate an alarm or any other applicable system.
Data is entered into the EEPROM from the keypad, but programming can be carried out only by the "master code" holders. Power failures do not affect stored data.
Brand | Visonic |
Condition | New |
![]() |
CL-80 Installation Manual (Size: 425.1 KB) | |
![]() |
CL-80 Spec Sheet (Size: 267.7 KB) |