Loading...

ComNet CNFE1003S2 Ethernet to Fiber Converter

Comnet   |   SKU: CNFE1003S2   |   Model: CNFE1003S2

Product Highlights

ComNet CNFE1003S2 Ethernet to Fiber Converter
Qty:
$450.46
Add to Quote

Usually ships within 1-3 days + Shipping Method

  • Free Lifetime Support
  • Free Warranty & Repair Service
  • Call for Bulk Pricing
Express Checkout:

The ComNet CNFE1003S2 Fast Ethernet to Optical Fiber Media Converter, SC Connector, Single Mode, 2 Fiber.

Description

The ComNet CNFE1003S2 Ethernet media converter is designed to transmit and receive 10/100 Mbps data over single mode optical fiber. The electrical interface will Auto-Negotiate to a 10 Mbps, or 100 Mbps Ethernet rate without any adjustments. The optical interface operates at a 100 Mbps Ethernet rate. This media converter is environmentally hardened to operate in extreme temperatures. LED indicators are provided for rapidly ascertaining equipment operating status. Packaged in the exclusive ComNet ComFit housing, the standard size units may be either wall or rack-mounted, or may be DIN-rail mounted by the addition of ComNet DINBKT1 adaptor plate.

Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.

Features

  • 10/100 BASE-T/TX electrical port
  • 100 BASE-FX optical port
  • Electrical port supports Auto-Negotiation for 10/100 Mbps, full/half duplex data.
  • Optical port supports 100 Mbps full duplex data
  • Automatic MDI/MDI-X crossover
  • Distances up to: 20 km (12 miles) single mode
  • Transparent to data encoding/compatible with major data protocols
  • SC optical connector
  • 2 fiber design
  • Voltage transient protection on all power and signal input/output lines
  • No in-field optical adjustments required
  • LED status indicators
  • Interchangeable between stand-alone or rack mount use -- ComFit
  • IEEE 802.3 compliant
  • Lifetime Warranty

Optional Mounting Hardware

Related Media Converters

Downloads

pdf
(Size: 161.5 KB)
pdf
(Size: 93.1 KB)
Condition New
Brand Comnet
NDAA Compliance No
Format Single Mode
Data Rate 10/100 Mbps
Connection Type SC
Voltage 8-24vDC
ComNet CNFE1003S2 Ethernet to Fiber Converter
  • (1) - ComNet CNFE1003S2
  • (1) - 9 Volt DC Power Supply
  • (1) - Installation Instructions
  • Limited Lifetime Warranty

The ComNet CNFE1003S2 Fast Ethernet to Optical Fiber Media Converter, SC Connector, Single Mode, 2 Fiber.

Description

The ComNet CNFE1003S2 Ethernet media converter is designed to transmit and receive 10/100 Mbps data over single mode optical fiber. The electrical interface will Auto-Negotiate to a 10 Mbps, or 100 Mbps Ethernet rate without any adjustments. The optical interface operates at a 100 Mbps Ethernet rate. This media converter is environmentally hardened to operate in extreme temperatures. LED indicators are provided for rapidly ascertaining equipment operating status. Packaged in the exclusive ComNet ComFit housing, the standard size units may be either wall or rack-mounted, or may be DIN-rail mounted by the addition of ComNet DINBKT1 adaptor plate.

Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.

Features

  • 10/100 BASE-T/TX electrical port
  • 100 BASE-FX optical port
  • Electrical port supports Auto-Negotiation for 10/100 Mbps, full/half duplex data.
  • Optical port supports 100 Mbps full duplex data
  • Automatic MDI/MDI-X crossover
  • Distances up to: 20 km (12 miles) single mode
  • Transparent to data encoding/compatible with major data protocols
  • SC optical connector
  • 2 fiber design
  • Voltage transient protection on all power and signal input/output lines
  • No in-field optical adjustments required
  • LED status indicators
  • Interchangeable between stand-alone or rack mount use -- ComFit
  • IEEE 802.3 compliant
  • Lifetime Warranty

Optional Mounting Hardware

Related Media Converters

Downloads

pdf
(Size: 161.5 KB)
pdf
(Size: 93.1 KB)
Condition New
Brand Comnet
NDAA Compliance No
Format Single Mode
Data Rate 10/100 Mbps
Connection Type SC
Voltage 8-24vDC
ComNet CNFE1003S2 Ethernet to Fiber Converter
  • (1) - ComNet CNFE1003S2
  • (1) - 9 Volt DC Power Supply
  • (1) - Installation Instructions
  • Limited Lifetime Warranty

Customers also viewed

Check items to add to the cart or select all