
ComNet CNFE1005M2-A In-dome Ethernet to Fiber Converter
Product Highlights
The ComNet CNFE1005M2-A Aigis In Dome 100Mbps Media Converter, ST Connector, Multi-Mode (MM), 2 Fibers.
Description
The ComNet CNFE1005M2-A Ethernet media converter is designed to transmit and receive 10/100 Mbps data over two (2) multi-mode optical fibers. It is designed to be mounted within an Aigis dome and provide optical Ethernet connectivity.
The electrical interface will Auto-Negotiate to a 10 Mbps, or 100 Mbps Ethernet rate without any adjustments. The optical interface operates at a 100 Mbps Ethernet rate. The CNFE1005M2-A is environmentally hardened to operate in extreme temperatures. An LED indicator confirms equipment operating status.
Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
Features
- 10/100 BASE-T/TX electrical port
- 100 BASE-FX optical port
- Electrical port supports Auto-Negotiation for 10/100 Mbps, full/half duplex data
- Optical port supports 100 Mbps full duplex data
- Automatic MDI/MDI-X
- Distances up to 3 km (1.9 miles)
- ST optical connectors
- Voltage transient protection on power input lines
- No in-field optical adjustments required
- LED Indicators
- IEEE 802.3 compliant
- Lifetime Warranty
Related Media Converter
Downloads
Condition | New |
---|---|
Brand | Comnet |
NDAA Compliance | No |
Technology | Digital - IP |
Item Type | Ethernet to Fiber |
Environment | Hardened |
Data Rate | 10/100 Mbps |
Ports | 1-Port |
Fiber Mode | Multi-mode |
Management | Unmanaged |
Connectors | ST |
Wavelength | 1310/1310 nm |
Form Factor | In-dome |
Format | Multi-Mode |
Data Rate | 10/100 Mbps |
Connection Type | ST |
Voltage | 8-15VDC |
- (1) - ComNet CNFE1005M2-A
- (1) - Mounting Hardware Kit
- (1) - Installation Instructions
- Limited Lifetime Warranty
The ComNet CNFE1005M2-A Aigis In Dome 100Mbps Media Converter, ST Connector, Multi-Mode (MM), 2 Fibers.
Description
The ComNet CNFE1005M2-A Ethernet media converter is designed to transmit and receive 10/100 Mbps data over two (2) multi-mode optical fibers. It is designed to be mounted within an Aigis dome and provide optical Ethernet connectivity.
The electrical interface will Auto-Negotiate to a 10 Mbps, or 100 Mbps Ethernet rate without any adjustments. The optical interface operates at a 100 Mbps Ethernet rate. The CNFE1005M2-A is environmentally hardened to operate in extreme temperatures. An LED indicator confirms equipment operating status.
Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
Features
- 10/100 BASE-T/TX electrical port
- 100 BASE-FX optical port
- Electrical port supports Auto-Negotiation for 10/100 Mbps, full/half duplex data
- Optical port supports 100 Mbps full duplex data
- Automatic MDI/MDI-X
- Distances up to 3 km (1.9 miles)
- ST optical connectors
- Voltage transient protection on power input lines
- No in-field optical adjustments required
- LED Indicators
- IEEE 802.3 compliant
- Lifetime Warranty
Related Media Converter
Downloads
Condition | New |
---|---|
Brand | Comnet |
NDAA Compliance | No |
Technology | Digital - IP |
Item Type | Ethernet to Fiber |
Environment | Hardened |
Data Rate | 10/100 Mbps |
Ports | 1-Port |
Fiber Mode | Multi-mode |
Management | Unmanaged |
Connectors | ST |
Wavelength | 1310/1310 nm |
Form Factor | In-dome |
Format | Multi-Mode |
Data Rate | 10/100 Mbps |
Connection Type | ST |
Voltage | 8-15VDC |
- (1) - ComNet CNFE1005M2-A
- (1) - Mounting Hardware Kit
- (1) - Installation Instructions
- Limited Lifetime Warranty