Comnet CNFE5SMS 5-Port Ethernet Self-managed Switch
Product Highlights
Comnet CNFE5SMS 5-Port 10/100 Mbps Ethernet Self-managed Switch.
The ComNet CNFE5SMS is a five-port self-managed Ethernet switch with uplink management functionality. It provides 5 ports operating at 10/100Mbps and is designed to combine Ethernet data from the four electrical ports into a fifth electrical port and forward that data to the next network device. There is no programming required to use this switch. The ComNet CNFE5SMS comes pre-programmed, preventing network video flooding with a switch selection that allows the switch to be used as an uplink or as an unmanaged switch. It is "Plug-and-Play" easy to use. LED indicators confirm the operating status of this device. The ComNet CNFE5SMS may be either wall mounted, rack mounted ("ComFit" packaging) or DIN--rail mounted with the use of the ComNet DINBKT1 adaptor plate.
Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high- line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
What are Self-managed Switches?
the ComNet Self-Managed Switch Series are a line of switches that allow incoming Ethernet data to be electrically or optically forwarded to another Ethernet device. The ComNet self-managed switch series with uplink management functionality is designed to combine data from the electrical ports to the last electrical or optical port and forwards this data to the next network device. There is no programming required to use this product.
Features & Benefits
- No programming required
- 10/100 Mbps Ethernet
- 5 10/100 BASE-T/TX electrical ports
- Electrical ports support Auto-Negotiation for 10/100 Mbps, full -or half -duplex data.
- Pre-programmed port for uplink to another Ethernet device
- Automatic MDI/MDI-X crossover
- Voltage transient protection on all power and signal input/ output lines
- Power and Activity status LED indicators
- Hot-swappable rack modules
- Interchangeable between stand-alone or rack mount use -- ComFit
- IEEE 802.3 compliant
- LIMITED LIFETIME WARRANTY
Downloads
| Condition | New |
|---|---|
| NDAA Compliance | No |
| Item Type | Network Switch |
| Technology | Digital - IP |
| Environment | Hardened |
| Data Rate | 10/100 Mbps |
| Ports | 5-Ports |
| Management | Self-managed |
| Connectors | RJ-45 |
| Form Factor | ComFit, Wall |
| PoE Class | Non-PoE |
| Switch Fabric | Unspecified |
| Uplink Ports | (1) 100Mbps TP |
| # of Ports | 5 PORT |
| Data Rate | 10/100 Mbps |
| Management | Managed |
| Form Factor | Rackmount, Surface |
| PoE | No |
| Features | Rugged / Hardened |
- (1) Ethernet Switch
- (1) Power Supply
- (1) Installation Manual
- LIMITED LIFETIME WARRANTY
Comnet CNFE5SMS 5-Port 10/100 Mbps Ethernet Self-managed Switch.
The ComNet CNFE5SMS is a five-port self-managed Ethernet switch with uplink management functionality. It provides 5 ports operating at 10/100Mbps and is designed to combine Ethernet data from the four electrical ports into a fifth electrical port and forward that data to the next network device. There is no programming required to use this switch. The ComNet CNFE5SMS comes pre-programmed, preventing network video flooding with a switch selection that allows the switch to be used as an uplink or as an unmanaged switch. It is "Plug-and-Play" easy to use. LED indicators confirm the operating status of this device. The ComNet CNFE5SMS may be either wall mounted, rack mounted ("ComFit" packaging) or DIN--rail mounted with the use of the ComNet DINBKT1 adaptor plate.
Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high- line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
What are Self-managed Switches?
the ComNet Self-Managed Switch Series are a line of switches that allow incoming Ethernet data to be electrically or optically forwarded to another Ethernet device. The ComNet self-managed switch series with uplink management functionality is designed to combine data from the electrical ports to the last electrical or optical port and forwards this data to the next network device. There is no programming required to use this product.
Features & Benefits
- No programming required
- 10/100 Mbps Ethernet
- 5 10/100 BASE-T/TX electrical ports
- Electrical ports support Auto-Negotiation for 10/100 Mbps, full -or half -duplex data.
- Pre-programmed port for uplink to another Ethernet device
- Automatic MDI/MDI-X crossover
- Voltage transient protection on all power and signal input/ output lines
- Power and Activity status LED indicators
- Hot-swappable rack modules
- Interchangeable between stand-alone or rack mount use -- ComFit
- IEEE 802.3 compliant
- LIMITED LIFETIME WARRANTY
Downloads
| Condition | New |
|---|---|
| NDAA Compliance | No |
| Item Type | Network Switch |
| Technology | Digital - IP |
| Environment | Hardened |
| Data Rate | 10/100 Mbps |
| Ports | 5-Ports |
| Management | Self-managed |
| Connectors | RJ-45 |
| Form Factor | ComFit, Wall |
| PoE Class | Non-PoE |
| Switch Fabric | Unspecified |
| Uplink Ports | (1) 100Mbps TP |
| # of Ports | 5 PORT |
| Data Rate | 10/100 Mbps |
| Management | Managed |
| Form Factor | Rackmount, Surface |
| PoE | No |
| Features | Rugged / Hardened |
- (1) Ethernet Switch
- (1) Power Supply
- (1) Installation Manual
- LIMITED LIFETIME WARRANTY
Customers also viewed
Check items to add to the cart or select all
