Dotworkz D2-HB-MVP D2 Heater Blower Camera Enclosure clear Lens
Product Highlights
The Dotworkz D2 environmental housing sets the industry standard for design excellence in camera protection from the rigors of outdoor use, vandalism and physical damage. To offer this superior performance in a cost-effective, all-weather package, Dotworkz has incorporated its proven Heater/Blower system into the D2 architecture. It is ideal in weather conditions ranging from 30 degree F (-1 degree C) to 95 degree F (35 degree C), where it will maintain PTZ cameras at optimal operating temperature.
Excessive cold and heat could potentially damage sensitive IP and analog cameras. To combat the cold, the unit's heater automatically activates at 40 degree F (4 degree C) and deactivates at 60 degree F (15 degree C) with a thermal cut-off assuring safe heating operation. The blower remains on at all time, keeping cameras cool and fog free. The Heater-Blower D2 system is expandable to our dual blower Tornado system.
The ultimate barrier between the camera and environmental factors, the Heater-Blower D2 significantly reduces weather-related wear-andtear. It is tested to be water, dust and air tight.
For the most extreme climates, Dotworkz suggests the D2 equipped with either the COOLDOME(tm) module designed for use where temperatures above 105 degree F (66 degree C) or the Ring of Fire(tm) module that will prevent cameras from freezing in climates down to -40 degree F (-40 degree C).
- IP and analog camera compatible
- Vari-Fit internal bracket included for perfect fit
- Impact Resistant Polycarbonate Thermal Plastic
- Thermostatically controlled Heater Blower System
- IP66 rated against dust, water, and salt water air
- IP68 (waterproof) connection ports
- Will not rust or corrode
- Onboard Component mounting space for: routers, cell networks, hard drives, UPS, WiMAX, mesh hardware, etc
- Onboard antenna mounting tab
- Heavy-duty lower lens
- 1 Year Warranty
Downloads
Condition | New |
---|---|
Brand | Dotworkz |
Camera Type | PTZ, Dome |
Environmental Controls | Blower/Fan, Heater |
Mounting Surface | Wall |
Applications | Dust-Tight, Extreme Cold, Vandal Resistant |
Color/Finish | (Off-) White |
Dome Finish | Clear |
Dome Diameter | 7 in. |
Housing Power | 24VAC, 100-120VAC, 220-240VAC |
Camera Power | 12VDC, 24VDC, 24VAC |
Construction | Plastic |
Certifications | IP66 |
Outdoor Use | Yes |
Finish | (Off-) White |
Pendant Mount Bracket | No |
Environment | Outdoor |
Outdoor Use | Yes |
Power Output | 24VAC |
Glass Color | Clear |
Outdoor Type | Heater & Blower |
Mount Type | Wall |
Form | Dome, PTZ |
The Dotworkz D2 environmental housing sets the industry standard for design excellence in camera protection from the rigors of outdoor use, vandalism and physical damage. To offer this superior performance in a cost-effective, all-weather package, Dotworkz has incorporated its proven Heater/Blower system into the D2 architecture. It is ideal in weather conditions ranging from 30 degree F (-1 degree C) to 95 degree F (35 degree C), where it will maintain PTZ cameras at optimal operating temperature.
Excessive cold and heat could potentially damage sensitive IP and analog cameras. To combat the cold, the unit's heater automatically activates at 40 degree F (4 degree C) and deactivates at 60 degree F (15 degree C) with a thermal cut-off assuring safe heating operation. The blower remains on at all time, keeping cameras cool and fog free. The Heater-Blower D2 system is expandable to our dual blower Tornado system.
The ultimate barrier between the camera and environmental factors, the Heater-Blower D2 significantly reduces weather-related wear-andtear. It is tested to be water, dust and air tight.
For the most extreme climates, Dotworkz suggests the D2 equipped with either the COOLDOME(tm) module designed for use where temperatures above 105 degree F (66 degree C) or the Ring of Fire(tm) module that will prevent cameras from freezing in climates down to -40 degree F (-40 degree C).
- IP and analog camera compatible
- Vari-Fit internal bracket included for perfect fit
- Impact Resistant Polycarbonate Thermal Plastic
- Thermostatically controlled Heater Blower System
- IP66 rated against dust, water, and salt water air
- IP68 (waterproof) connection ports
- Will not rust or corrode
- Onboard Component mounting space for: routers, cell networks, hard drives, UPS, WiMAX, mesh hardware, etc
- Onboard antenna mounting tab
- Heavy-duty lower lens
- 1 Year Warranty
Downloads
Condition | New |
---|---|
Brand | Dotworkz |
Camera Type | PTZ, Dome |
Environmental Controls | Blower/Fan, Heater |
Mounting Surface | Wall |
Applications | Dust-Tight, Extreme Cold, Vandal Resistant |
Color/Finish | (Off-) White |
Dome Finish | Clear |
Dome Diameter | 7 in. |
Housing Power | 24VAC, 100-120VAC, 220-240VAC |
Camera Power | 12VDC, 24VDC, 24VAC |
Construction | Plastic |
Certifications | IP66 |
Outdoor Use | Yes |
Finish | (Off-) White |
Pendant Mount Bracket | No |
Environment | Outdoor |
Outdoor Use | Yes |
Power Output | 24VAC |
Glass Color | Clear |
Outdoor Type | Heater & Blower |
Mount Type | Wall |
Form | Dome, PTZ |