Interlogix D7120WDMA 10/100 Ethernet Transceiver (A End)
Interlogix D7120WDMA 10/100 Ethernet Transceiver, MM Laser, 1 Fiber, "A" End (1310/1550 nm)
The Interlogix D7120WDMA Ethernet transceiver is designed to transmit and receive 10 or 100 Mbps data over multimode optical fiber. The Interlogix D7120WDMA will function as a 10 Mbps Ethernet link, or as a 100 Mbps Ethernet link without any adjustments. The Interlogix D7120WDMA is environmentally hardened to operate in extreme temperatures. Status indicating LED's for power and data type are present at the RJ-45 connector and at the fiber optic transceiver end. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments. Standalone, surface mount form factor.
- 10/100 Mbps Ethernet: auto-negotiating, 10/100 selectable, full-or half-duplex data
- Auto network detection MDI/MDI-X
- Distances up to 3 miles (5 km)
- NTCIP compatible
- Tested and certified by an independent testing laboratory for full compliance with the environmental requirements of NEMA TS-1/TS-2 and the Caltrans specification for traffic signal control equipment.
- ST optical connectors standard
- No in-field electrical or optical adjustments required
- Power, transmit and receive data status LED indicators
- IEEE 802.3 compliant
- Comprehensive lifetime warranty
NOTE: WDMA must mate with a WDMB.
Downloads
| Condition | New |
|---|---|
| Brand | Interlogix |
| NDAA Compliance | Yes |
| Item Type | Transceiver |
| Signal Type | Ethernet |
| Channels | 1 |
| Data Rate | 10/100 Mbps |
| Fibers Required | 1 Fiber |
| Fiber Mode | Multi-mode |
| Connectors | ST |
| Tx Wavelength | 1310 nm |
| Rx Wavelength | 1550 nm |
| Max. Distance | 5 km |
| Form Factor | Surface |
| Fiber Optic Transmission use | Ethernet Data |
| Channels | 1 Channel |
| Connection Type | ST |
| Format | Multi-Mode, Single Mode |
| Mounting Options | Rack Mount |
Interlogix D7120WDMA 10/100 Ethernet Transceiver (A End)
- (1) - Ethernet Transceiver
- User's Manual
- Lifetime Warranty
Interlogix D7120WDMA 10/100 Ethernet Transceiver, MM Laser, 1 Fiber, "A" End (1310/1550 nm)
The Interlogix D7120WDMA Ethernet transceiver is designed to transmit and receive 10 or 100 Mbps data over multimode optical fiber. The Interlogix D7120WDMA will function as a 10 Mbps Ethernet link, or as a 100 Mbps Ethernet link without any adjustments. The Interlogix D7120WDMA is environmentally hardened to operate in extreme temperatures. Status indicating LED's for power and data type are present at the RJ-45 connector and at the fiber optic transceiver end. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments. Standalone, surface mount form factor.
- 10/100 Mbps Ethernet: auto-negotiating, 10/100 selectable, full-or half-duplex data
- Auto network detection MDI/MDI-X
- Distances up to 3 miles (5 km)
- NTCIP compatible
- Tested and certified by an independent testing laboratory for full compliance with the environmental requirements of NEMA TS-1/TS-2 and the Caltrans specification for traffic signal control equipment.
- ST optical connectors standard
- No in-field electrical or optical adjustments required
- Power, transmit and receive data status LED indicators
- IEEE 802.3 compliant
- Comprehensive lifetime warranty
NOTE: WDMA must mate with a WDMB.
Downloads
| Condition | New |
|---|---|
| Brand | Interlogix |
| NDAA Compliance | Yes |
| Item Type | Transceiver |
| Signal Type | Ethernet |
| Channels | 1 |
| Data Rate | 10/100 Mbps |
| Fibers Required | 1 Fiber |
| Fiber Mode | Multi-mode |
| Connectors | ST |
| Tx Wavelength | 1310 nm |
| Rx Wavelength | 1550 nm |
| Max. Distance | 5 km |
| Form Factor | Surface |
| Fiber Optic Transmission use | Ethernet Data |
| Channels | 1 Channel |
| Connection Type | ST |
| Format | Multi-Mode, Single Mode |
| Mounting Options | Rack Mount |
Interlogix D7120WDMA 10/100 Ethernet Transceiver (A End)
- (1) - Ethernet Transceiver
- User's Manual
- Lifetime Warranty
Customers also viewed
Check items to add to the cart or select all
