Altronix EFLOW104NB Single Output Power Supply Charger, 24VDC @ 10A, 115VAC, Board
Altronix
|
SKU: EFLOW104NB
|
Model: EFLOW104NB
Product Highlights
Altronix EFLOW104NB 2 Output Power Supply/Charger w/Fire Alarm
The eFlow104NB power supply/charger converts a 120VAC / 60Hz input to a 24VDC @ 10 amp output.
Features
- Input 120VAC 60Hz, 4.5 amp
- 24VDC output
- 10 amp continuous supply current
- Aux. power-limited output rated @ 1 amp (unswitched)
- Over Voltage Protection
- Filtered and electronically regulated outputs
- Built-in charger for sealed lead acid or gel type batteries
- Maximum charge current 1.54 amp
- Automatic switch over to stand-by battery when AC fails
- Transfer to stand-by battery power is instantaneous with no interruption
- Supervised Fire Alarm disconnect (latching or nonlatching) 10K EOL resistor. Operates on a normally open (NO) or normally closed (NC) trigger
- AC fail supervision (form "C" contacts)
- Battery fail & presence supervision (form "C" contacts)
- Low power shutdown. Shuts down DC output terminals if battery voltage drops below 80% of nominal. Prevents deep battery discharge
- Green AC Power LED indicates 120VAC present
- AC input and DC output LED indicators
- Short circuit and overload protection
Downloads
(Size: 118.1 KB)
(Size: 503.2 KB)
Condition | New |
---|---|
Brand | Altronix |
Power Supply Type | Board |
# of Outputs | 1 |
Input Voltage | 120 VAC |
Output Voltage | 24 VDC |
Output Current | 10.0 Amp |
Features | Battery Charger, Fire Alarm Disconnect, Surge Protection |
Output Type | DC |
Fire Alarm Interface | Yes |
Certifications | cUL, UL |
Power Options | 10 amp @ 24VDC |
Output Protection | Electronic |
Number of Outputs | 1 |
Input Voltage | 120VAC |
Battery Charging | Yes |
The eFlow104NB power supply/charger converts a 120VAC / 60Hz input to a 24VDC @ 10 amp output.
Features
- Input 120VAC 60Hz, 4.5 amp
- 24VDC output
- 10 amp continuous supply current
- Aux. power-limited output rated @ 1 amp (unswitched)
- Over Voltage Protection
- Filtered and electronically regulated outputs
- Built-in charger for sealed lead acid or gel type batteries
- Maximum charge current 1.54 amp
- Automatic switch over to stand-by battery when AC fails
- Transfer to stand-by battery power is instantaneous with no interruption
- Supervised Fire Alarm disconnect (latching or nonlatching) 10K EOL resistor. Operates on a normally open (NO) or normally closed (NC) trigger
- AC fail supervision (form "C" contacts)
- Battery fail & presence supervision (form "C" contacts)
- Low power shutdown. Shuts down DC output terminals if battery voltage drops below 80% of nominal. Prevents deep battery discharge
- Green AC Power LED indicates 120VAC present
- AC input and DC output LED indicators
- Short circuit and overload protection
Downloads
(Size: 118.1 KB)
(Size: 503.2 KB)
Condition | New |
---|---|
Brand | Altronix |
Power Supply Type | Board |
# of Outputs | 1 |
Input Voltage | 120 VAC |
Output Voltage | 24 VDC |
Output Current | 10.0 Amp |
Features | Battery Charger, Fire Alarm Disconnect, Surge Protection |
Output Type | DC |
Fire Alarm Interface | Yes |
Certifications | cUL, UL |
Power Options | 10 amp @ 24VDC |
Output Protection | Electronic |
Number of Outputs | 1 |
Input Voltage | 120VAC |
Battery Charging | Yes |