Altronix EFLOW4N Single Output Power Supply Charger, 12/24VDC @ 4A, 115VAC, BC300 Enclosure
Altronix
|
SKU: EFLOW4N
|
Model: EFLOW4N
Product Highlights
Altronix EFLOW4N 2 Output Power Supply/Charger w/Fire Alarm
Express Checkout:
eFlow4N is a power supply/charger that converts a 115VAC, 60Hz input into a single 12VDC or 24VDC power-limited output.
Features
- 120VAC, 60Hz, 3.5 amp
- Input fuse: 5A/250V
- 12VDC or 24VDC selectable output
- 12VDC or 24VDC @ 4.0 amp supply current
- Power-limited output
- Auxiliary Power-Limited output rated @ 1 amp (unswitched)
- Over Voltage Protection
- Built-in charger for sealed lead acid or gel type batteries
- Maximum charge current 1.54 amp
- Automatic switch over to stand-by battery when AC fails. Transfer to stand-by battery power is instantaneous with no interruption
- AC fail supervision (form "C" contacts)
- Battery fail & presence supervision (form "C" contacts)
- Low power shutdown. Shuts down DC output terminals if battery voltage drops below 71-73% for 12V units and 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge
- Supervised Fire Alarm disconnect (latching or non-latching) 10K EOL resistor. Operates on a normally open (NO) or normally closed (NC) trigger
- Green AC Power LED indicates 120VAC present
- AC input, DC output and Battery LED indicators
- Short circuit and overload protection
- Unit is complete with power supply, enclosure, battery leads and cam lock
Downloads
| Condition | New |
|---|---|
| Brand | Altronix |
| Power Supply Type | Cabinet, Wall Mount |
| # of Outputs | 1 |
| Input Voltage | 115 VAC |
| Output Voltage | 12 VDC, 24 VDC |
| Output Current | 4.0 Amp |
| Features | Battery Charger, Fire Alarm Disconnect, Low Power Shutdown, Surge Protection, UL Listed |
| Output Type | DC |
| Fire Alarm Interface | Yes |
| Certifications | CE, CSFM, cUL, UL |
| Power Options | 4 amp @ 12VDC, 4 amp @ 24VDC |
| Output Protection | Fuse |
| Number of Outputs | 1 |
| Input Voltage | 120VAC |
| Battery Charging | Yes |
eFlow4N is a power supply/charger that converts a 115VAC, 60Hz input into a single 12VDC or 24VDC power-limited output.
Features
- 120VAC, 60Hz, 3.5 amp
- Input fuse: 5A/250V
- 12VDC or 24VDC selectable output
- 12VDC or 24VDC @ 4.0 amp supply current
- Power-limited output
- Auxiliary Power-Limited output rated @ 1 amp (unswitched)
- Over Voltage Protection
- Built-in charger for sealed lead acid or gel type batteries
- Maximum charge current 1.54 amp
- Automatic switch over to stand-by battery when AC fails. Transfer to stand-by battery power is instantaneous with no interruption
- AC fail supervision (form "C" contacts)
- Battery fail & presence supervision (form "C" contacts)
- Low power shutdown. Shuts down DC output terminals if battery voltage drops below 71-73% for 12V units and 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge
- Supervised Fire Alarm disconnect (latching or non-latching) 10K EOL resistor. Operates on a normally open (NO) or normally closed (NC) trigger
- Green AC Power LED indicates 120VAC present
- AC input, DC output and Battery LED indicators
- Short circuit and overload protection
- Unit is complete with power supply, enclosure, battery leads and cam lock
Downloads
| Condition | New |
|---|---|
| Brand | Altronix |
| Power Supply Type | Cabinet, Wall Mount |
| # of Outputs | 1 |
| Input Voltage | 115 VAC |
| Output Voltage | 12 VDC, 24 VDC |
| Output Current | 4.0 Amp |
| Features | Battery Charger, Fire Alarm Disconnect, Low Power Shutdown, Surge Protection, UL Listed |
| Output Type | DC |
| Fire Alarm Interface | Yes |
| Certifications | CE, CSFM, cUL, UL |
| Power Options | 4 amp @ 12VDC, 4 amp @ 24VDC |
| Output Protection | Fuse |
| Number of Outputs | 1 |
| Input Voltage | 120VAC |
| Battery Charging | Yes |
