You have no items in your shopping cart.

Account

Product was successfully added to your shopping cart.
  • EH16-3, Pelco Camera Enclosure EH16-3, Pelco Camera Enclosure

Pelco EH16-3 Outdoor Vandal-Resistant Camera Enclosure, 230VAC

Pelco | SKU: EH16-3 | Model: EH16-3

Product Highlights

Pelco EH16-3 Outdoor Vandal-Resistant Camera Enclosure, 230VAC
- +
$123.48
Options

Usually ships within 24 hours

  • Express Checkout:
  • Checkout with PayPal

EH16-3 - Outdoor Vandal-Resistant Camera Enclosure with Heater/Blower, 230VAC Input

The EH16 Series is an indoor/outdoor, highly reliable camera enclosure with a compact body designed for easy installation. Constructed from die-cast aluminum, the EH16 Series enclosure is designed to operate in a wide range of environments. The EH16 Series enclosure is designed for use with analog and IP cameras that have both fixed and variable focal length lenses (with or without auto iris operation). The tethered, detachable lid provides easy access to the innovative camera sled. Two adjustable glands (PG9 and PG11) on the bottom of the enclosure allow for easy installation of the power and video cables.

Product Features

  • High Reliability Die-Cast Construction
  • Temperature Range from --30 degree to 60 degree C (--22 degree to 140 degree F)
  • Meets IP66 and NEMA Type 4X Standards
  • IK10 Mechanical Impact Resistance
  • Heater and Blower with 24 VAC Camera Power Supply
  • Advanced Optics for Megapixel Camera Support
  • Cable Entry Glands and Mounting Holes on Bottom of Enclosure
  • Designed for Indoor/Outdoor Applications
  • Easy Access for Servicing and Installation

Additional Information

Product SKU EH16-3
Brand Pelco
Condition New
Camera Type Fixed
Environmental Controls Blower/Fan, Heater
Mounting Surface Bracket Required
Applications Extreme Cold, Extreme Hot, Vandal Resistant
Color/Finish Gray
Housing Power 220-240VAC
Camera Power 24VAC
Max Camera Length 7.00-8.99
Security Features Cable Managed
Construction Aluminum
Certifications IP66
Outdoor Use Yes
Cable Entry 1 x PG9 and 1 x PG11 compression glands on bottom
Form Box
Finish Alodine with gray polyester powder coat
Environment Indoor/Outdoor
Power Output 230 VAC
Mount Type Wall
Glass Color Clear
Outdoor Use Yes
Outdoor Type Heater & Blower
  • (1) - EH16 Series Enclosure
  • (1) - Installation manual
  • (1) - Screw, 1/4-20 x 3/8-inch, Phillips
  • (1) - Washer, 1/4-inch split lock
  • (2) - Screws, M6 x 1.0 P x 12 mm, T30 Torx head
  • (1) - Gland and nut, PG9 cable
  • (1) - Gland and nut, PG11 cable
  • (1) - Wire tie, 4-inch
  • (1) - Cat5 PoE cable with RJ-45 connector
  • Warranty - 3 Years