Product was successfully added to your shopping cart.
  • EHXM3036-2, Pelco Bullet Cameras EHXM3036-2, Pelco Bullet Cameras

Pelco EHXM3036-2 ExSite 36x Fixed Camera, 24VAC, NTSC

Pelco | SKU: EHXM3036-2 | Model: EHXM3036-2

Product Highlights

Pelco EHXM3036-2 ExSite 36x Fixed Camera, 24VAC, NTSC

This item is discontinued. Call (866) 440-2288 for Replacement

The ExSite Fixed Series explosionproof camera enclosures are designed to meet the rigorous requirements of explosionproof and dust-ignitionproof electrical equipment for installation and use in hazardous locations. The system can be installed in a standard or inverted position and features manually adjustable 200 degrees of pan and 180 degrees of tilt positioning.

All units feature an integrated camera and lens package with LowLight technology. The day/night model features a 36X lens, built-in motion detection and 128X wide dynamic range imager. The electropolished 316L stainless steel construction makes the ExSite Fixed Series ideal for either indoor or outdoor applications. The system has an absolute operating temperature range of --76 degree to 140 degree F (--60 degree to 60 degree C). Within two hours after power-up, the entire unit can de-ice and be operational from a temperature of --13 degree F (--25 degree C).


  • Electropolished 316L Stainless Steel Construction
  • Upright or Inverted Installation
  • Manual 200 degree Pan and 180 degree Tilt Adjustments
  • Receiver and Enclosure with Integrated Optics Package (IOP)
  • For Use in a Variety of Harsh and/or Hazardous Environments, including Marine Environments
  • 36X Day/Night, 128XWide Dynamic Range, Motion Detection
  • 540 TVL Horizontal Resolution
  • Multilingual On-Screen Menus
  • Password Protection
  • Autofocus with Manual Override
  • Configurable Camera Settings
  • Auto Iris with Manual Override
  • Integral Multiprotocol Receiver/Driver
  • Meets NEMA Type 4X and IP66 Standards
  • Designed for Minimal Maintenance
  • On-Board Connector for: Pelco VC-UTP Video Connector; Pelco TXB Series Translator Boards for Use with Hernis and Other Protocols; Pelco FS85011A and Third-Party Fiber Optic Transmitters

What's in the Box:

  • 1 - Enclosure
  • 1 - Camera module
  • 1 - Sun shroud
  • 1 - Sun shroud hardware pack
  • 2 - Screws, 6-32 Phillips, pan head
  • 2 - Nylon washers
  • 1 - Spanner wrench
  • 2 - Allen wrenches, 1.5 mm
  • 2 - Allen wrenches, 2 mm

Additional Information

Product SKU EHXM3036-2
Brand Pelco
Condition New
Features Auto Gain Control, Automatic White Balance, Motion Detection Tracking, On Screen Display Menu, Weather Resistant, Wide Dynamic Range
Technology Analog SD / 960H
Resolution 480 - 540
Image Sensor 1/4-inch CCD
Signal Format NTSC (Domestic)
Housing Color Silver
Voltage 24 VAC
Video Connection BNC
Optical Zoom 36X
Special Features Image Flip, On-screen Menu, Video Motion Detection, Wide Dynamic Range
Camera Type Bullet
Environment Outdoor (IP65+), Low Temp (<14°F), Vandal-resistant (IK10+)
Lens Motorized Zoom
Imaging System Day/Night (No IR)
Signal System NTSC
Video Output 1 Vp-p, 75 ohms
Scanning System 2:1 interlace
Synchronization Internal/AC line lock, phase adjustable usingremote control, V-Sync
Automatic White Balance Automatic with manual override 
Auto Gain Control Automatic/OFF
Weatherproof IP66
Camera Signal Analog
Resolution 540 TVL
Sensor Option 1/4" CCD
Lens Type Motorized Zoom
Lens Size 36X
Infrared Distance Non Infrared
Durability Weather Resistant
Mount Type Wall
Voltage 24VAC
Electronic Shutter Automatic (electronic iris)/Manual NTSC: 1/2 ~ 1/30,000
Operating Temperature –76° to 140°F (–60° to 60°C)
Minimum Scene Illumination 0.018 lux at 1/2 sec shutter (color), 0.55 lux at 1/60 sec shutter (B-W), 0.00018 lux at 1/2 sec shutter (B-W)
Image Pixels-Effective NTSC: 768 (H) x 494 (V)
Image Device 1/4-inch progressive scan CCD
Wide Dynamic Range Yes
Motion Detection Tracking Yes
Auto Gain Control Yes
Automatic White Balance Yes
On Screen Display Menu Yes