VMP ERWEN-6E 19-in. Wall Rack Enclosure (6U)

VMP ERWEN-6E 19" Equipment Hinged Wall Rack Enclosure -- 6U

The 6U (Rack Unit) wall mounted equipment rack enclosure shall be the Video Mount Products (VMP) ERWEN-6E. The overall dimensions for the ERWEN-6E are 14.5" H x 24.3" W x 21.9" D with a maximum usable depth of 16". The ERWEN-6E shall work with all EIA compliant 19" rack equipment and accessories which are less than 16" in depth. The ERWEN-6E shall come equipped with two sets of adjustable rack rails which are #10-32UNF threaded and have rack spaces numbered. The ERWEN-6E shall come with a lockable, reversible tempered glass front door. The ERWEN-6E shall have a removable wall plate with mounting holes for wooden studs with 16" centers. The ERWEN-6E shall have a lockable, hinged wall plate allowing the main enclosure to rotate 90 degrees while mounted on the wall and fully loaded. The ERWEN-6E shall be vented top and bottom with cable entry and exit points located on the top and bottom of the wall plate and on the top of the main enclosure. The ERWEN-6E shall have two mounting points for standard fans which can be purchased separately. The ERWEN-6E shall have removable side panels which can accept locks (sold separately). The ERWEN-6E shall have a load capacity of 120 lbs. The ERWEN-6E shall be fully welded and ship assembled. The ERWEN-6E shall have a powder coat black finish.

• Welded steel construction
• Ships fully assembled
• Works with all standard 19" rack equipment and accessories
• Rails have numbered spaces with standard 10-32 threading
• 16" usable depth
• Adjustable front and rear rails
• Vented top and bottom
• Top and bottom cable routing knockouts
• Reversible hinged tempered glass front door
• Removable hinged back panel
• Load capacity -- 120 lbs
• Black powder coat finish