You're currently on:

FH-SIXE31-50-F, Pelco Fortified Camera System

More Views

Pelco FH-SIXE31-50-F 3Mp Fortified Solar Application IP Camera System

$ 3034.0000
Pelco FH-SIXE31-50-F 3Mp Fortified Solar Application IP Camera System


Model: FH-SIXE31-50-F

Condition: New

Availability: Usually ships within 24 hours

Add Items to Cart
Contact us

The 12VDC solar-powered FH-S Series is engineered to protect cameras and lenses installed within normal environmental conditions when powered by a 12VDC solar electric system. Most camera systems are not optimized for 12VDC and cause an extreme load on the solar-powered system. The Fortified Series 12VDC solar powered compatible systems optimize the camera system for solar powering.

Main Features

  • Integrated Camera System including Enclosure, Lens, Camera, and Power Supply; all FH Series Camera Systems are Wired, Tested, and Certified
  • Non-metallic long-life, thermoplastic alloy will not corrode, rust, or oxidize
  • Temperature Range from --20 degree to 45 degree C (--4 degree to 113 degree F)
  • Heating and Cooling System
  • IP66 rated (dust and water-tight)
  • IK10 Mechanical Impact Resistance
  • 12VDC Input Power

Camera Features

  • SureVision 2.0 Technology, Including: True Wide Dynamic Range (WDR) / Advanced Low-Light Performance / Anti-Bloom Technology / 3D Noise Filtering / Enhanced Tone Mapping Retains Color Accuracy and Image Contrast
  • 3 Megapixel Resolution
  • Up to 20 Images per Second (IPS) at 2048x1536
  • CS Lens Mounts
  • Auto Back Focus (ABF)
  • Power over Ethernet (PoE), IEEE 802.3af
  • Adaptive Motion Detection and Camera Sabotage Analytics
  • Local Storage (Micro SD)
  • Compatible with Pelco and Third-Party Video Systems
  • ONVIF Profile S Conformance

Lens Features

  • 3 Megapixel
  • 1/3" Lens Format
  • 15-50mm Focal Length
  • F1.5 Max Aperture
  • DC Auto-Iris
  • 3.3x Zoom Ratio
  • CS-Mount

Media Converter Features

  • 10/100 Mbps Ethernet: 10Base-T/100Base-TX Electrical Port, 100Base-FX Optical Port
  • Optical Port Supports 100 Mbps Full-Duplex Data
  • Supports Distances up to 80 km (49.7 mi) Using Interchangeable Small Form-Factor Pluggable (FSFP) Modules for Specific Fiber Type, Distance, and Connector (Must Be Ordered Separately)
  • Designed to Meet NEMA TS 1/TS 2 and Caltrans Traffic Signal Control Equipment Environmental Standards
Brand Pelco
Condition New
Product Technology Network (IP)
Environment Outdoor, Vandal-resistant
Image Sensor Day/Night (NO IR)
Optical Format 1/3"
Image Sensor CMOS
Progressive Scanning Yes
Compression H.264, MJPEG
Power PoE, 12V DC
PoE Class 802.3af: <15.4 W
Resolution 3.2MP: 2048 x 1536
Lens Varifocal
Min Focal Length 15.0
Max Focal Length 50.0
Video Connection(s) RJ-45
Audio 2-Way (Mic.)
Internal Storage Memory Card Slot
Housing Color White
Special Features Wide Dynamic Range, Video Motion Detection, Content Analytics, Digital Noise Reduction , ONVIF Support

  • (1) IXE31 Box Camera

  • (1) 13M15-50 Varifocal Lens

  • (1) FMCI-PF1M Media Converter

  • (1) Power Supply

  • (1) Thermoplastic Enclosure

  • (1) Aluminum Wall Mount

  • (1) Conduit plate

  • (1) Conduit plate gasket

  • (1) Reusable desiccant canister (REACh compliant) silica gel pack

  • (1) Duplex fiber gland bushing (two-hole)

  • (1) Ethernet female-to-female adapter

  • (1) PG9 data gland

  • (1) PG9 data gland lock nut

  • Warranty - 3 Years

Calculate Shipping Price

Enter your destination to get a shipping estimate.