Account

Product was successfully added to your shopping cart.
  • FH-SIXP51-6-F, Pelco Fortified Camera System FH-SIXP51-6-F, Pelco Fortified Camera System
  • FH-SIXP51-6-F, Pelco Fortified Camera System FH-SIXP51-6-F, Pelco Fortified Camera System
  • FH-SIXP51-6-F, Pelco Fortified Camera System FH-SIXP51-6-F, Pelco Fortified Camera System
  • FH-SIXP51-6-F, Pelco Fortified Camera System FH-SIXP51-6-F, Pelco Fortified Camera System

Pelco FH-SIXP51-6-F 5Mp Fortified Solar Application IP Camera System

Pelco | SKU: FH-SIXP51-6-F | Model: FH-SIXP51-6-F

Product Highlights

Pelco FH-SIXP51-6-F 5Mp Fortified Solar Application IP Camera System

This item is discontinued. Call (866) 440-2288 for Replacement

The 12VDC solar-powered FH-S Series is engineered to protect cameras and lenses installed within normal environmental conditions when powered by a 12VDC solar electric system. Most camera systems are not optimized for 12VDC and cause an extreme load on the solar-powered system. The Fortified Series 12VDC solar powered compatible systems optimize the camera system for solar powering.

Main Features

  • Integrated Camera System including Enclosure, Lens, Camera, and Power Supply; all FH Series Camera Systems are Wired, Tested, and Certified
  • Non-metallic long-life, thermoplastic alloy will not corrode, rust, or oxidize
  • Temperature Range from --20 degree to 45 degree C (--4 degree to 113 degree F)
  • Heating and Cooling System
  • IP66 rated (dust and water-tight)
  • IK10 Mechanical Impact Resistance
  • 12VDC Input Power

Camera Features

  • 5 Megapixel Resolution
  • Up to 12 Images per Second (IPS) at 2592x1944
  • Multiple CS Lens Options
  • Auto Back Focus (ABF)
  • Accessible Edge Storage with Micro SDXC Card
  • Motion Detection and Camera Sabotage Analytics
  • Operating Temperature from --10 degree to 50 degree C (14 degree to 122 degree F)
  • Power over Ethernet (PoE) and 24 VAC Power Input
  • Compatible with Pelco and Third-Party Video Systems
  • ONVIF Profile S Conformance

Lens Features

  • 3 Megapixel
  • 1/3" Lens Format
  • 2.2-6mm Focal Length
  • F1.3 Max Aperture
  • DC Auto-Iris
  • 2.7x Zoom Ratio
  • CS-Mount

Media Converter Features

  • 10/100 Mbps Ethernet: 10Base-T/100Base-TX Electrical Port, 100Base-FX Optical Port
  • Optical Port Supports 100 Mbps Full-Duplex Data
  • Supports Distances up to 80 km (49.7 mi) Using Interchangeable Small Form-Factor Pluggable (FSFP) Modules for Specific Fiber Type, Distance, and Connector (Must Be Ordered Separately)
  • Designed to Meet NEMA TS 1/TS 2 and Caltrans Traffic Signal Control Equipment Environmental Standards

Additional Information

Product SKU FH-SIXP51-6-F
Brand Pelco
Condition New
Features Auto Gain Control, Automatic White Balance, Day/Night, Digital Noise Reduction, Flickerless, Motion Detection Tracking, ONVIF, Wide Dynamic Range
Technology Digital - IP
Housing Color White
Audio 1-Way
Image Sensor Day/Night (NO IR)
Optical Format 1/3.2"
Image Sensor CMOS
Resolution 5MP: 2592 x 1944
Scanning Method Progressive
Compression H.264, MJPEG
PoE Class 802.3af: ≤ 15.4 W
Environment Outdoor (IP65+), Vandal-resistant (IK10+)
Max Focal Length 6.0
Lens Varifocal
Video Connection(s) RJ-45/12
Min Focal Length 2.2
Power PoE, 12V DC
Internal Storage Memory Card Slot
Special Features Digital Noise Reduction , ONVIF Conformant, Video Motion Detection, Wide Dynamic Range
Infrared Distance Non Infrared
Weatherproof IP66
Digital Noise Reduction Yes (ON/OFF selectable)
Resolution 5 Megapixel
Camera Signal Network IP
Automatic White Balance 2,500° to 8,000°K
S/N Ratio 50 dB
Wide Dynamic Range 65 db
Angle of View Wide: Diagonal 139°, Horizontal 114°, Vertical 87°, Tele: Diagonal 55°, Horizontal 44°, Vertical 33°
Electronic Shutter 1 ~ 1/8,000 sec
Dimensions (W x H) 64.11 x 19.21 x 39.12 cm(25.24" D x 7.56" W x 15.40" H)
Voltage 12vDC, 24VAC, PoE
Durability Indoor, Weather Resistant
Compression Method H.264, M-JPEG
Protocols TCP/IP, UDP/IP (Unicast, Multicast IGMP), ICMP, IPv4, SNMP v2c/v3, HTTP, HTTPS, SSL, SSH, SMTP, FTP, RTSP, UPnP, DNS, NTP, RTP, RTCP, LDAP (client), QoS
Mount Type Bracket Required, Corner, Pipe, Pole
Lens Size 2.2-6mm
Lens Type Varifocal
Image Device 1/3.2-inch CMOS
Power Consumption 1.2 A at 12 VDC
Operating Temperature –20° to 45°C (–4° to 113°F)
Operating Humidity 20% to 80%, RH noncondensing
Minimum Scene Illumination Color(33 ms): 0.3 lux, Color(200 ms): 0.02 lux, Mono(33 ms): 0.1 lux, Mono(200 ms): 0.01 lux
Connection Type Wired
Audio Yes
ONVIF Yes
Auto Gain Control Yes
Wide Dynamic Range Yes
Day/Night Yes
Digital Noise Reduction Yes
Motion Detection Tracking Yes
Automatic White Balance Yes
Flickerless Yes
  • (1) IXP51 Box Camera
  • (1) 13M2.2-6 Varifocal Lens
  • (1) FMCI-PF1M Media Converter
  • (1) Power Supply
  • (1) Thermoplastic Enclosure
  • (1) Aluminum Wall Mount
  • (1) Conduit plate
  • (1) Conduit plate gasket
  • (1) Reusable desiccant canister (REACh compliant) silica gel pack
  • (1) Duplex fiber gland bushing (two-hole)
  • (1) Ethernet female-to-female adapter
  • (1) PG9 data gland
  • (1) PG9 data gland lock nut
  • Warranty - 3 Years