You're currently on:

Altronix FIRESWITCH108 Managed NAC Power Extender

Altronix FIRESWITCH108 Managed NAC Power Extender

$ 332.7200
Altronix FIRESWITCH108 Managed NAC Power Extender



Condition: New

Availability: Usually ships within 1-2 days

Add Items to Cart
Contact us

Managed NAC Power Extender - 24VDC @ 10 amp. 4 - Class A or 8 - Class B NAC circuits, 8 aux. outputs or any combination, Ethernet port facilitates programming and status monitoring via laptop or LAN, LCD display, operates 2-wire Horn/Strobes, Built-in sync protocols, two - 1 amp aux. outputs, red encl. 18"H x 14.5"W x 4.625"D, 115VAC input, UL Listed (UL864), ULC Listed (ULC-S527-99), CSFM. The Altronix FireSwitch108 is a cost effective managed NAC Power Extender. It interfaces with 12 or 24VDC Fire Alarm Control Panels (FACP) to provide Notification Appliance Circuit expansion support, for additional horns/strobes to allow ADA compliancy. It also provides auxiliary power to support system accessories. It delivers electronically regulated and filtered 24VDC power to Class B or Class ANAC loop circuits. Additionally, a separate 1 amp auxiliary output for 4-wire smoke detectors is available. Alarm current can be divided between the eight (8) outputs for powering NAC devices. Outputs are rated at 2.5 amp max., and can be independently programmed for Steady, Temporal Code 3 or Strobe Synchronization. All outputs may be programmed for Input to Output Follower Mode (output will follow input. i.e. March Time Input, March Time Output). In non-alarm condition independent loop supervision for Class A and/or Class B FACP NAC circuits is provided. In the event of a loop trouble, the FACP will be notified via the steered input (input 1 or input 2). In addition, there are common trouble output terminals [NC, C, NO] which are used to indicate general loop/system trouble. Two (2) FACP signaling outputs can be employed and directed to control supervision and power delivery to any combination of the eight (8) outputs. It provides a programmable LCD display interface, plus an ethernet port interface for remote programmability and monitoring.

  • Programmable LCD display interface
  • EOL resistor value is programmable by output
  • Ethernet port interface for remote programmability and monitoring
  • 2-wire horn/strobe Sync mode allows audible notification appliances (horns) to be silenced while visual notification appliances (strobes) continue to operate
  • Sync protocols include Potter, Gentex, System Sensor, and CooperWheelock
  • Temporal Code 3, Steady Mode, Input to Output Follower Mode (maintains synchronization of notification appliances circuit)
  • Compatible with 12VDC or 24VDC fire panels
  • Output loop supervision directed to input 1 or input 2
  • Common trouble Dry N.C. output for reporting trouble to remote FACP
  • Ground fault detection - Ground fault maximum test impedance 1,000 ohm
  • Ground fault Dry N.O. output to report ground fault to remote FACP
  • CO Temporal Code 4 (NFPA720) include Gentex, Potter and System Sensor devices
Brand Altronix
Condition New
Calculate Shipping Price

Enter your destination to get a shipping estimate.