Pelco FMCI-PG2 Two Channel IP Media Converter, Standard Size
Product Highlights
Pelco FMCI-PG2 | Supports Auto-negotiation and Automatic Medium Dependent Interface/Medium Dependent Interface Crossover (MDI/MDI-X) Operation. Buy Now. Fast Shipping
The FMCI-PG2 is a dual channel Ethernet media converter This device accepts a 10/100/1000 Mbps Ethernet rate and convert it to a 1000 Mbps optical Ethernet rate using either one or two optical fibers depending upon the specific optical module used. Interchangeable small form-factor pluggable (FSFP) transceivers must be ordered separately. It is designed to operate in harsh industrial environments without electrical or optical adjustments (plug and play). I may be mounted in a rack or directly onto a surface. It is designed to operate in extreme temperatures. Built-in indicator LEDs display operating status. External power is required for it. The units can be powered with the recommended FEXTPS fiber external power supply. The optical transmission of Ethernet-compatible IP camera surveillance video makes it ideal for transportation, airport, and college campus applications.
Features
- Full-Duplex Transmission of 10/100/1000 Mbps Ethernet
- 10Base-T/100Base-TX/1000Base-TX Electrical Port
- 1000Base-FX Optical Port When Used with Suitable Small Form-Factor Pluggable (FSFP) Modules - Supports Auto-negotiation and Automatic Medium Dependent Interface/Medium Dependent Interface Crossover (MDI/MDI-X) Operation for Full-Duplex or Half-Duplex Operation
- Supports Distances up to 120 km (74.5 mi) Using Interchangeable FSFP Modules for Compatibility with a Wide Range of Optical Fibers, Optical Connector Types, and Optical Transmission (Must Be Ordered Separately)
- Designed to Meet NEMA TS 1/TS 2 and Caltrans Traffic Signal Control Equipment Environmental Standards
- Voltage Transient Protection on All Power and Signal Input/Output Lines Provides Protection from Power Surges and Other Voltage Transient Events
- LED Status Indicators for Monitoring All Critical and Normal Operating Parameters
- Hot-Swappable Rack Modules
- Stand-Alone or Rack-Mountable Modular Design
- Compliant with IEEE 802.3 Standards
Downloads
| Condition | New |
|---|---|
| Brand | Pelco |
| NDAA Compliance | Yes |
| Data Rate | 10/100/1000 Mbps |
Pelco FMCI-PG2 | Supports Auto-negotiation and Automatic Medium Dependent Interface/Medium Dependent Interface Crossover (MDI/MDI-X) Operation. Buy Now. Fast Shipping
The FMCI-PG2 is a dual channel Ethernet media converter This device accepts a 10/100/1000 Mbps Ethernet rate and convert it to a 1000 Mbps optical Ethernet rate using either one or two optical fibers depending upon the specific optical module used. Interchangeable small form-factor pluggable (FSFP) transceivers must be ordered separately. It is designed to operate in harsh industrial environments without electrical or optical adjustments (plug and play). I may be mounted in a rack or directly onto a surface. It is designed to operate in extreme temperatures. Built-in indicator LEDs display operating status. External power is required for it. The units can be powered with the recommended FEXTPS fiber external power supply. The optical transmission of Ethernet-compatible IP camera surveillance video makes it ideal for transportation, airport, and college campus applications.
Features
- Full-Duplex Transmission of 10/100/1000 Mbps Ethernet
- 10Base-T/100Base-TX/1000Base-TX Electrical Port
- 1000Base-FX Optical Port When Used with Suitable Small Form-Factor Pluggable (FSFP) Modules - Supports Auto-negotiation and Automatic Medium Dependent Interface/Medium Dependent Interface Crossover (MDI/MDI-X) Operation for Full-Duplex or Half-Duplex Operation
- Supports Distances up to 120 km (74.5 mi) Using Interchangeable FSFP Modules for Compatibility with a Wide Range of Optical Fibers, Optical Connector Types, and Optical Transmission (Must Be Ordered Separately)
- Designed to Meet NEMA TS 1/TS 2 and Caltrans Traffic Signal Control Equipment Environmental Standards
- Voltage Transient Protection on All Power and Signal Input/Output Lines Provides Protection from Power Surges and Other Voltage Transient Events
- LED Status Indicators for Monitoring All Critical and Normal Operating Parameters
- Hot-Swappable Rack Modules
- Stand-Alone or Rack-Mountable Modular Design
- Compliant with IEEE 802.3 Standards
Downloads
| Condition | New |
|---|---|
| Brand | Pelco |
| NDAA Compliance | Yes |
| Data Rate | 10/100/1000 Mbps |
Customers also viewed
Check items to add to the cart or select all
