Pelco FUMS-FFX4TX4 4 Port Unmanaged Ethernet Switches
Product Highlights
Pelco FUMS-FFX4TX4 | Electrical Port Supports Autonegotiation for 10 Mbps or 100 Mbps,Full-Duplex or Half-Duplex Data | Automatic MDI/MDI-X Operation. Buy Now. Fast Shipping.
The FUMS-FFX4TX4 is a Ethernet 4 port unmanaged switch designed to transmit and receive 10/100 Mbps data over optical fiber through user-selectable small form-factor pluggable (FSFP) options; or 10 Mbps or 100 Mbps data over Cat5e or Cat6 electrical cable. The electrical interface autonegotiates between 10 Mbps or 100 Mbps Ethernet rates without any adjustments. The optical interface operates at a 100 Mbps Ethernet rate. This unit integrates four or eight independent 10/100 Mbps channels in a single package. Modular in design, this model may be either wall- or rack mounted. LED indicators display operating status and critical operating parameters.
Features
- 10/100 Mbps Ethernet
- 10Base-T/100Base-TX Electrical Port
- 100Base-FX Optical Port - Electrical Port Supports Autonegotiation for 10 Mbps or 100 Mbps,Full-Duplex or Half-Duplex Data
- Optical Port Supports 100 Mbps Full-Duplex Data
- Automatic Medium Dependent Interface/Medium Dependent Interface Crossover (MDI/MDI-X) Operation
- Designed to Meet NEMA TS 1/TS 2 and Caltrans Traffic Signal Control Equipment Environmental Standards
- Uses Interchangeable Small Form-Factor Pluggable (FSFP) Modules for Specific Fiber Type, Distance, and Connector (Must Be Ordered Separately)
- Voltage Transient Protection on All Power and Signal Input/Output Lines Provides Protection from Power Surges and Other Voltage Transient Events
- LED Status Indicators for Monitoring All Critical and Normal Operating Parameters
- Hot-Swappable Rack Modules
- Stand-Alone or Rack-Mountable Modular Design
- Compliant with IEEE 802.3 Standards
| Condition | New |
|---|---|
| Brand | Pelco |
| NDAA Compliance | Yes |
| # of Ports | 4 PORT |
| Data Rate | 10/100 Mbps |
| Management | Unmanaged |
| Form Factor | Rackmount |
| PoE | No |
Pelco FUMS-FFX4TX4 | Electrical Port Supports Autonegotiation for 10 Mbps or 100 Mbps,Full-Duplex or Half-Duplex Data | Automatic MDI/MDI-X Operation. Buy Now. Fast Shipping.
The FUMS-FFX4TX4 is a Ethernet 4 port unmanaged switch designed to transmit and receive 10/100 Mbps data over optical fiber through user-selectable small form-factor pluggable (FSFP) options; or 10 Mbps or 100 Mbps data over Cat5e or Cat6 electrical cable. The electrical interface autonegotiates between 10 Mbps or 100 Mbps Ethernet rates without any adjustments. The optical interface operates at a 100 Mbps Ethernet rate. This unit integrates four or eight independent 10/100 Mbps channels in a single package. Modular in design, this model may be either wall- or rack mounted. LED indicators display operating status and critical operating parameters.
Features
- 10/100 Mbps Ethernet
- 10Base-T/100Base-TX Electrical Port
- 100Base-FX Optical Port - Electrical Port Supports Autonegotiation for 10 Mbps or 100 Mbps,Full-Duplex or Half-Duplex Data
- Optical Port Supports 100 Mbps Full-Duplex Data
- Automatic Medium Dependent Interface/Medium Dependent Interface Crossover (MDI/MDI-X) Operation
- Designed to Meet NEMA TS 1/TS 2 and Caltrans Traffic Signal Control Equipment Environmental Standards
- Uses Interchangeable Small Form-Factor Pluggable (FSFP) Modules for Specific Fiber Type, Distance, and Connector (Must Be Ordered Separately)
- Voltage Transient Protection on All Power and Signal Input/Output Lines Provides Protection from Power Surges and Other Voltage Transient Events
- LED Status Indicators for Monitoring All Critical and Normal Operating Parameters
- Hot-Swappable Rack Modules
- Stand-Alone or Rack-Mountable Modular Design
- Compliant with IEEE 802.3 Standards
| Condition | New |
|---|---|
| Brand | Pelco |
| NDAA Compliance | Yes |
| # of Ports | 4 PORT |
| Data Rate | 10/100 Mbps |
| Management | Unmanaged |
| Form Factor | Rackmount |
| PoE | No |
