Altronix HubSat4D 4 Channel Passive UTP Transceiver

Altronix HubSat4D passive UTP transceiver hub with integral camera power transmits UTP video, RS422/RS485 data and power over a single CAT-5 or higher structured cable. Unit provides 4 camera channels in a wall mount enclosure. Video transmission range is up to 750 ft. max. per channel. Units are compatible with AC and/or DC fixed or PTZ cameras when utilizing Altronix HubWayAv or HubWayDv video balun/combiners. In addition, the unit features 24VAC or 28VAC PTC protected outputs and surge suppression. Optionally, the HubSat4D can be used as an accessory module to transmit video from up to 4 cameras over a single CAT-5 or higher structured cable back to the HubWay, HubWayLD or HubWayLDH passive (non-amplified) and active (amplified) UTP transceiver hubs. In addition, the HubSat4D powers these cameras locally to eliminate the possibility of voltage drop associated with long cable runs.

Input:

• 115 VAC 50/60 Hz, 1.25 Amp.
• Primary fuse is rated at 3.5 Amp/250 V.

Video:

• Four (4) channels of video over twisted-pair up to 750 ft.
• Four (4) 75 Ohm video outputs.

Data:

• RS422/RS485 data inputs.

Power:

• Individually selectable 24 VAC or 28 VAC power outputs with OFF position.
• Unit provides up to 1 Amp max. per channel not to exceed a total of 4 Amp (100 VA) maximum current.
• Class 2 rated power limited outputs.
• PTC protected outputs.
• PTCs are rated @ 1 Amp per channel.
• Surge suppression.

Visual Indicators:

Features:

• Wall mount enclosure.

Warranty:

• Limited lifetime