Altronix HubSat4Di (4) Channel UTP Transceiver Hub, Isolated Power

Altronix HubSat4Di passive (non-amplified) UTP transceiver hub with integral isolated camera power transmits UTP video, RS422/RS485 data and power over a single CAT-5 or higher structured cable. Unit provides 4 camera channels in a wall mount enclosure. Video transmission range is up to 750 ft. max. per channel. Units are compatible with AC and/or DC fixed or PTZ cameras when utilizing Altronix HubWayAv or HubWayDv video balun/combiners. In addition, the unit features individually selectable 24VAC or 28VAC electronically isolated fuse protected outputs with surge suppression. Optionally, the HubSat4Di can be used as an accessory module to transmit video from up to 4 cameras over a single CAT-5 or higher structured cable back to the HubWay, HubWayLD or HubWayLDH passive (non-amplified) and Active (amplified) UTP transceiver Hubs. In addition, the HubSat4Di provides power to these cameras locally to eliminate the possibility of voltage drop associated with long cable runs.

Input:

• 115VAC 50/60Hz, 1.25 Amp.
• Primary in-line fuse is rated @ 3.5A/250V.

Video:

• Four (4) channels of quality video over twisted-pair up to a distance of 750 ft. per channel.
• Four (4) 75 Ohm composite video outputs.

Data:

• RS422/RS485 data input.

Power:

• Individually selectable 24VAC or 28VAC power outputs with OFF position.
• Unit provides up to 1 Amp max. per channel not to exceed a total of 4 Amp maximum current.
• Individual electronically isolated outputs.
• PTC protected outputs are rated @ 1 Amp per channel.
• Surge suppression.

Visual Indicators:

• Four (4) power LED indicators.

Enclosure Dimensions:

• 8.5"H x 7.5"W x 3.5"D

Warranty:

• Limited Lifetime