Altronix HubWay82CD 8 Channel Passive UTP Hub/Balun Kit
Product Highlights
***Note: Altronix HubWay82CD has CAT-5 connectors on the front & BNC connectors on the rear of the unit. Model HubWay82CDS locates all connectors to the front of the unit.
Altronix HubWay82CD passive UTP transceiver hub with integral camera power transmits UTP video, RS422/RS485 data and power over a single CAT-5 or higher structured cable. Unit provides 8 camera channels in a space saving 1U EIA 19" rack mount chassis which may be rack, wall or shelf mounted. Video transmission range is up to 750 ft. max. per channel. Units are compatible with AC fixed or PTZ cameras when utilizing Altronix HubWayAv video balun/combiners. In addition, the unit features individually selectable 24 VAC or 28 VAC PTC protected outputs with surge suppression. An optional HubSat4D passive UTP transceiver hub with Integral camera power can be used as an accessory module to transmit video from up to 4 cameras over a single CAT-5 or higher structured cable back to the HubWay82CD. In addition, the HubSat4D provides power to these cameras locally to virtually eliminate the possibility of voltage drop associated with long cable runs.
- Individually selectable 24VAC or 28VAC power outputs with OFF position.
- Unit provides up to 1 Amp max. per channel not to exceed a total of 5 Amp (150 VA) maximum current.
- Class 2 Rated power limited PTC protected outputs. PTCs are rated @ 1 Amp per channel.
- Surge suppression. Primary fuse (internal) is rated at 5 Amp/250 V.
- Input: 115 VAC 60 Hz, 1.5 Amp.
- Data: RS422/RS485 data input.
- Video: Eight (8) channels of video over twisted-pair up to 750 ft. Eight (8) 75 Ohm composite video outputs.
- AC input power indicator.
- Eight (8) individual power LED indicators.
- Illuminated master power disconnect circuit breaker with manual reset.
- IEC-320 - 3-wire grounded line (power) cord (detachable).
- Rack, wall or shelf mount.
- Modular 1U standard EIA 19" rack mount chassis.
- Dimensions: 1.625"H x 19.125"W x 8.5"D.
- Optional HubSat4D allows transmission of up to four (4) video signals over a single CAT-5 or higher structured cable.
- Lifetime Warranty
Downloads
| Condition | New |
|---|---|
| Balun Type | Twisted Pair Kit |
| Channels | 8 |
| Features | Data, Power |
| Type | Passive |
| Input Voltage | 115 VAC |
| Rack Mountable | Yes |
| Integral Camera Power | With Power |
| Channels | 8 |
| Connection Type | RS422, RS485 |
| Form | Wall Mount |
***Note: Altronix HubWay82CD has CAT-5 connectors on the front & BNC connectors on the rear of the unit. Model HubWay82CDS locates all connectors to the front of the unit.
Altronix HubWay82CD passive UTP transceiver hub with integral camera power transmits UTP video, RS422/RS485 data and power over a single CAT-5 or higher structured cable. Unit provides 8 camera channels in a space saving 1U EIA 19" rack mount chassis which may be rack, wall or shelf mounted. Video transmission range is up to 750 ft. max. per channel. Units are compatible with AC fixed or PTZ cameras when utilizing Altronix HubWayAv video balun/combiners. In addition, the unit features individually selectable 24 VAC or 28 VAC PTC protected outputs with surge suppression. An optional HubSat4D passive UTP transceiver hub with Integral camera power can be used as an accessory module to transmit video from up to 4 cameras over a single CAT-5 or higher structured cable back to the HubWay82CD. In addition, the HubSat4D provides power to these cameras locally to virtually eliminate the possibility of voltage drop associated with long cable runs.
- Individually selectable 24VAC or 28VAC power outputs with OFF position.
- Unit provides up to 1 Amp max. per channel not to exceed a total of 5 Amp (150 VA) maximum current.
- Class 2 Rated power limited PTC protected outputs. PTCs are rated @ 1 Amp per channel.
- Surge suppression. Primary fuse (internal) is rated at 5 Amp/250 V.
- Input: 115 VAC 60 Hz, 1.5 Amp.
- Data: RS422/RS485 data input.
- Video: Eight (8) channels of video over twisted-pair up to 750 ft. Eight (8) 75 Ohm composite video outputs.
- AC input power indicator.
- Eight (8) individual power LED indicators.
- Illuminated master power disconnect circuit breaker with manual reset.
- IEC-320 - 3-wire grounded line (power) cord (detachable).
- Rack, wall or shelf mount.
- Modular 1U standard EIA 19" rack mount chassis.
- Dimensions: 1.625"H x 19.125"W x 8.5"D.
- Optional HubSat4D allows transmission of up to four (4) video signals over a single CAT-5 or higher structured cable.
- Lifetime Warranty
Downloads
| Condition | New |
|---|---|
| Balun Type | Twisted Pair Kit |
| Channels | 8 |
| Features | Data, Power |
| Type | Passive |
| Input Voltage | 115 VAC |
| Rack Mountable | Yes |
| Integral Camera Power | With Power |
| Channels | 8 |
| Connection Type | RS422, RS485 |
| Form | Wall Mount |
