Altronix HubWay82CDS 8 Channel Passive UTP Hub/Balun Kit

***Note: Altronix HubWay82CDS has CAT-5 & BNC connectors on the rear of the unit. Model HubWay82CD relocates the CAT-5 jacks to the front of the unit.

Altronix HubWay82CDS passive (non-amplified) UTP transceiver hub with integral camera power transmits UTP video, RS422/RS485 data and power over a single CAT-5 or higher structured cable. Unit provides 8 camera channels in a space saving 1U EIA 19" rack mount chassis which may be wall or shelf mounted. Video transmission range is up to 750 ft. max. per channel. Units are compatible with AC fixed or PTZ cameras when utilizing Altronix HubWayAv video balun/combiners (included). An optional HubSat4D passive UTP transceiver hub with integral camera power can be used as an accessory module to transmit video from up to 4 cameras over a single CAT-5 or higher structured cable back to the HubWay82CDS. In addition, the HubSat4D provides power to these cameras locally to eliminate the possibility of voltage drop associated with long cable runs.

Features:

• Unit provides up to 1 Amp max. per channel not to exceed a total of 5 Amp (150 VA) maximum current.
• PTC's are rated @ 1 Amp per channel.
• Class 2 Rated power limited outputs.
• Surge suppression.
• Main fuse (internal) is rated at 5 Amp/250 V.
• Input 115 VAC 60 Hz, 2 Amp.
• Data: Two (2) data/PTZ inputs.
• Video: Eight (8) channels of video over twisted-pair up to 750 ft. Eight (8) 75 Ohm video outputs.
• AC input power indicator.
• Eight (8) individual power LED indicators.
• Illuminated master power disconnect circuit breaker with manual reset.
• IEC-320 - 3-wire grounded line (power) cord (detachable).
• Rack, wall or shelf mount.

Rack Chassis:

• Modular 1U standard EIA 19" rack mount chassis.
• Dimensions: 1.625"H x 19.125"W x 8.5"D.

Warranty:

• Lifetime Warranty.