Altronix HubWay8CDS 8 Channel Passive Transceiver Hub w/ Integral Power, Video, & Data

***Note: Altronix HubWay8CDS has CAT-5 & BNC connectors on the rear of the unit. Model HubWay8CD relocates the CAT-5 jacks to the front of the unit.

Altronix HubWay8CDS passive UTP transceiver hub with integral camera power transmits composite video, RS422/RS485 data and power over a single CAT-5 or higher structured cable. Unit provides 8 camera channels in a space saving 1U EIA 19" rack mount chassis which may be wall or shelf mounted. Video transmission range is up to 750 ft. max. per channel. Units are compatible with AC and/or DC fixed or PTZ cameras when utilizing Altronix HubWayAv, HubWayDv or HubWayDvi video balun/combiners. An optional HubSat4D passive UTP transceiver hub with integral camera power can be used as an accessory module to transmit video from up to 4 cameras over a single CAT-5 or higher structured cable back to the HubWay8CDS. In addition, the HubSat4D provides power to these cameras locally to eliminate the possibility of voltage drop associated with long cable runs.

Input:

• 115 VAC 60 Hz, 1.5 amp.
• Primary fuse (internal) is rated at 5 Amp/250V.

Video:

• Eight (8) channels of video over twisted pair up to 750 ft.
• Eight (8) 75 Ohm video outputs.

Data:

• RS422/RS485 data ports.

Power:

• Individually selectable 24VAC or 28VAC power outputs with OFF position.
• Unit provides up to 1 Amp max. per channel not to exceed a total of 5 Amp (150 VA) maximum current.
• Class 2 rated power limited outputs.
• PTCs are rated @ 1 Amp per channel.
• Surge suppression.

Visual Indicators:

• AC input power indicator.
• Eight (8) power LED indicators.

Features:

• Illuminated master power disconnect circuit breaker with manual reset.
• IEC 320 - 3-wire grounded line (power) cord (detachable).
• Unit can be rack, wall or shelf mounted.
• 1U rack mount chassis for use in standard EIA 19" racks.

Warranty:

• Limited lifetime warranty

PROUDLY BUILT IN THE U.S.A.