Pelco IBP219-ER 2 Megapixel Environmental IR Bullet Camera, 3 - 9mm Lens
Product Highlights
Pelco IBP219-ER | Digital Noise Reduction | ONVIF | Up to 30 images per second (ips) at 1080p | Advanced low-light capability with sensitivity down to 0.0 lux. Buy Now.
The IBP219-ER Bullet Camera supports up to 2 simultaneous video streams and a third service stream. The 2 streams can be compressed with efficient H.264 High or Main profiles or MJPEG formats. The streams can be configured to a variety of frame rates and bit rates to optimize image quality with bandwidth and storage efficiency.
In addition, the camera features onboard edge storage with a microSD card (sold separately). Video clips of varying lengths can be stored to the card upon alarm, or video can be written continuously to the microSD card in the case of network outage. Video can be retrieved from the card through the FTP protocol.
Simple motion detection algorithms allow the camera to record or trigger an alarm when motion is detected in a selected zone or with the entire scene. A camera sabotage alarm is triggered if the lens is obstructed or when the camera is repositioned. It seamlessly connects to Pelco video management systems such as Endura version 2.0 (or later) and Digital Sentry version 7.3 (or later). It also integrates with major third-party video management systems through the open Pelco API and other third-party software and systems through the open ONVIF Profile S standard.
A standard Web browser interface allows for easy remote setup and administration. Controls are optimized for convenient one-step camera configuration for features including color, exposure, flicker control, and streaming.
Features
- Maximum resolution up to 1920 x 1080 (2.1MP) resolution
- Up to 30 images per second (ips) at 1080p
- Autofocus motorized remote varifocal zoom lens
- Advanced low-light capability with sensitivity down to 0.0 lux in the night mode with integrated adaptive IR illumination
- Dual analytics
- Easy to install
- Accurate color reproduction
- Accessible edge storage with micro SDXC card
- Motion detection and camera sabotage detection
- IP66-rated
- Power over Ethernet (PoE) and 24VAC power input
- Compatible with Pelco and third-party video systems
- ONVIF Profile S conformant
- Light gray finish (RAL 9022); satin texture
Condition | New |
---|---|
Features | Auto Gain Control, Digital Noise Reduction, Motion Detection Tracking, ONVIF |
Brand | Pelco |
NDAA Compliance | Yes |
Protocols | TCP/IP, UDP, ICMP, IPv4, SNMP v2c/v3, HTTP, HTTPS, SSL, SSH, SMTP, FTP, RTSP, UPnP, DNS, NTP, RTP, RTCP, LDAP |
Power Consumption | < 11.50 W |
Operating Temperature | –40° to 50°C (–40° to 122°F) |
Operating Humidity | 15% to 85%, noncondensing |
Minimum Scene Illumination | 0.30 lux (Color) |
Lens Size | 3-9mm |
Camera Signal | Network IP |
Lens Type | Varifocal |
Digital Noise Reduction | Yes (ON/OFF selectable) |
Weatherproof | IP66 |
Video Output | RJ-45 |
Automatic White Balance | 2,500° to 8,000°K |
Infrared Distance | 0~60 Feet |
Resolution | 2 Megapixel (1080p) |
Compression Method | H.264 |
Connection Type | Wired, Wireless |
Image Device | 1/3-inch Progressive scan CMOS |
Electronic Shutter | 1/5 ~ 1/10,000 sec |
Durability | Weather Resistant |
Mount Type | Wall |
Audio | Yes |
Motion Detection Tracking | Yes |
ONVIF | Yes |
Auto Gain Control | Yes |
Digital Noise Reduction | Yes |
- (1) - IBP Series Bullet Camera
- (1) - CD containing the DU2.3, Pelco Media Player, User Manual, Specifications
- (1) - Mounting template
- (1) - Mounting kit with screws and wall inserts
- (1) - 24V connector
- (1) - Alarm connector
- (1) - T-20 pin Torx screw driver
- Warranty - 3 Years
Pelco IBP219-ER | Digital Noise Reduction | ONVIF | Up to 30 images per second (ips) at 1080p | Advanced low-light capability with sensitivity down to 0.0 lux. Buy Now.
The IBP219-ER Bullet Camera supports up to 2 simultaneous video streams and a third service stream. The 2 streams can be compressed with efficient H.264 High or Main profiles or MJPEG formats. The streams can be configured to a variety of frame rates and bit rates to optimize image quality with bandwidth and storage efficiency.
In addition, the camera features onboard edge storage with a microSD card (sold separately). Video clips of varying lengths can be stored to the card upon alarm, or video can be written continuously to the microSD card in the case of network outage. Video can be retrieved from the card through the FTP protocol.
Simple motion detection algorithms allow the camera to record or trigger an alarm when motion is detected in a selected zone or with the entire scene. A camera sabotage alarm is triggered if the lens is obstructed or when the camera is repositioned. It seamlessly connects to Pelco video management systems such as Endura version 2.0 (or later) and Digital Sentry version 7.3 (or later). It also integrates with major third-party video management systems through the open Pelco API and other third-party software and systems through the open ONVIF Profile S standard.
A standard Web browser interface allows for easy remote setup and administration. Controls are optimized for convenient one-step camera configuration for features including color, exposure, flicker control, and streaming.
Features
- Maximum resolution up to 1920 x 1080 (2.1MP) resolution
- Up to 30 images per second (ips) at 1080p
- Autofocus motorized remote varifocal zoom lens
- Advanced low-light capability with sensitivity down to 0.0 lux in the night mode with integrated adaptive IR illumination
- Dual analytics
- Easy to install
- Accurate color reproduction
- Accessible edge storage with micro SDXC card
- Motion detection and camera sabotage detection
- IP66-rated
- Power over Ethernet (PoE) and 24VAC power input
- Compatible with Pelco and third-party video systems
- ONVIF Profile S conformant
- Light gray finish (RAL 9022); satin texture
Condition | New |
---|---|
Features | Auto Gain Control, Digital Noise Reduction, Motion Detection Tracking, ONVIF |
Brand | Pelco |
NDAA Compliance | Yes |
Protocols | TCP/IP, UDP, ICMP, IPv4, SNMP v2c/v3, HTTP, HTTPS, SSL, SSH, SMTP, FTP, RTSP, UPnP, DNS, NTP, RTP, RTCP, LDAP |
Power Consumption | < 11.50 W |
Operating Temperature | –40° to 50°C (–40° to 122°F) |
Operating Humidity | 15% to 85%, noncondensing |
Minimum Scene Illumination | 0.30 lux (Color) |
Lens Size | 3-9mm |
Camera Signal | Network IP |
Lens Type | Varifocal |
Digital Noise Reduction | Yes (ON/OFF selectable) |
Weatherproof | IP66 |
Video Output | RJ-45 |
Automatic White Balance | 2,500° to 8,000°K |
Infrared Distance | 0~60 Feet |
Resolution | 2 Megapixel (1080p) |
Compression Method | H.264 |
Connection Type | Wired, Wireless |
Image Device | 1/3-inch Progressive scan CMOS |
Electronic Shutter | 1/5 ~ 1/10,000 sec |
Durability | Weather Resistant |
Mount Type | Wall |
Audio | Yes |
Motion Detection Tracking | Yes |
ONVIF | Yes |
Auto Gain Control | Yes |
Digital Noise Reduction | Yes |
- (1) - IBP Series Bullet Camera
- (1) - CD containing the DU2.3, Pelco Media Player, User Manual, Specifications
- (1) - Mounting template
- (1) - Mounting kit with screws and wall inserts
- (1) - 24V connector
- (1) - Alarm connector
- (1) - T-20 pin Torx screw driver
- Warranty - 3 Years