2 Power Supply/Chargers with Access power controllers - 16 fused power-limited outputs, each set of 8 outputs are selectable for 12VDC @ 3.3 amp or 24VDC @ 3.6 amp, outputs are individually selectable for Fail-Safe or Fail-Secure operation or as dry form "C" contacts, fire alarm disconnect is selectable by output, Features: Low battery cutoff, Over voltage protection (OVP), AC & battery monitoring, encl. 26"H x 19"W x 6.25"D, 115VAC input, Accommodates up to 4 - 12VDC/12AH batteries, UL Listed (UL294), cUL Listed (ULC-S319-05), CSFM Approved. Maximal11F Access Power Controller distributes and switches power to access control systems and accessories. It converts a 120VAC 60Hz input into sixteen (16) independently controlled 12VDC or 24VDC fuse protected outputs. These Fail-Safe/Fail-Secure power outputs may be converted to dry form "C" contacts. The outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Keypad, Push Button, REX PIR, etc. Units will route power to a variety of access control hardware devices including: Mag Locks, Electric Strikes, Magnetic Door Holders, etc. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the sixteen (16) outputs. All interconnecting equipment must be UL Listed.
a) Normally open (NO) or normally closed (NC) dry contact input
b) Polarity reversal input from FACP signaling circuit
|Number of Outputs||16|
|Certifications||CE, CSFM, cUL, UL|
|Power Options||3.3 amp @ 12VDC plus 3.3 amp @ 12VDC, 3.3 amp @ 12VDC plus 3.6 amp @ 24VDC, 3.6 amp @ 24VDC plus 3.6 amp @ 24VDC|
|Fire Alarm Interface||Yes|