ETS ML1-WS IP54 Un-Pre-Amplified, 1/2" Knockout Mountable Weather Resistant Microphone
Product Highlights
The ML1-WS IP54 from ETS is a is a low cost, weather resistant omni-directional electret microphone for use with I/P cameras accepting microphone level input signals (PC compatible input). This product is suitable for OEM applications requiring an outdoor rated microphone. The microphone mounts in a standard 1/2" electrical knock out hole. The attached cord is 6' long and comes standard with a stereo 3.5mm connector on one end. The ML1-WS's 3.5mm connector can be removed and the cord can be directly connected to cameras with terminal blocks.
Features
- Omni-directional pattern
- Max SPL 120db
- Frequency response: 20-18khz
- Sensitivity –50db
- 1.5-10Vdc operation
- 300-5k Ohm load resistance
- S/N 40db
- 3.5mm stereo connector
- 1/2" thick removable windscreen
- Grey ABS plastic housing
- Mounts in a standard 1/2" electrical knock out hole
| Condition | New |
|---|---|
| Brand | ETS |
The ML1-WS IP54 from ETS is a is a low cost, weather resistant omni-directional electret microphone for use with I/P cameras accepting microphone level input signals (PC compatible input). This product is suitable for OEM applications requiring an outdoor rated microphone. The microphone mounts in a standard 1/2" electrical knock out hole. The attached cord is 6' long and comes standard with a stereo 3.5mm connector on one end. The ML1-WS's 3.5mm connector can be removed and the cord can be directly connected to cameras with terminal blocks.
Features
- Omni-directional pattern
- Max SPL 120db
- Frequency response: 20-18khz
- Sensitivity –50db
- 1.5-10Vdc operation
- 300-5k Ohm load resistance
- S/N 40db
- 3.5mm stereo connector
- 1/2" thick removable windscreen
- Grey ABS plastic housing
- Mounts in a standard 1/2" electrical knock out hole
| Condition | New |
|---|---|
| Brand | ETS |
