Altronix NetWay16M (16)-Port Managed PoE Midspan

Altronix NetWay16M managed midspans provide power and pass data (e.g., video) for PoE compliant cameras/edge devices. Cameras/edge devices may be located up to 100 m (328 ft.) from the NetWay unit. A NetWayXT repeater module can be utilized to extend the distance an additional 100 m (328 ft.) for a total range of up to 200 m (656 ft.). A maximum range of 600 m (1968 ft.) is possible using multiple repeaters, based on camera/device port requirement. NetWay managed midspans are capable of supporting non-PoE compliant fixed and PTZ IP cameras utilizing NetWay1512 or NetWay3012 adapters.

Input:

• 115VAC 60Hz, 4.9 amp.

Power:

• Sixteen (16) ports of cameras/edge devices over Ethernet (CAT5) cable up to a distance of 100 m (328 ft.) per port.
• Unit provides up to 30W max. full power per port. Total power: 300W.
• IEEE 802.3af and IEEE 802.3at compliant (PoE Plus).
• Short circuit protection.

Functions:

• Programmable PoE shutdown for each port. Utilized to reset cameras/edge devices.
• Auto detection and protection of legacy non-PoE cameras/edge devices.

Features:

• LAN or laptop connection enables programming of PoE shutdown and port monitoring.
• Graphical User Interface (GUI).
• Illuminated master power disconnect circuit breaker with manual reset (switch).
• Individual port status LEDs.
• IEC 320 - Detachable 3-wire grounded line (power) cord.
• Unit can be rack or shelf mounted.
• 1U rack mount chassis for use in standard EIA 19" rack.

Miscellaneous:

• Shipping weight: 8.30 lbs.
• Dimensions: 1.625"H x 19.125"W x 8.5"D
• Warranty: LIMITED LIFETIME