Altronix NetWay8 Eight (8) Port PoE Midspan

Altronix NetWay8 Midspans provide power and pass data (video) for PoE compliant cameras/devices. Eight ports in a space saving 1U EIA 19" rack mount chassis. Cameras/devices may be located up to 100m (328 ft.) from the NetWay unit. A NetWayXT repeater module can be utilized to extend the distance an additional 100m (328 ft.) for a total range of up to 200m (656 ft.). A maximum range of 600m (1968 ft.) is possible using multiple repeaters, based on camera/device port requirement. NetWay Midspans are capable of supporting non-PoE compliant fixed and PTZ IP cameras by utilizing NetWay1512 or NetWay3012 adapters.

Input:

• 115VAC 50/60Hz, 2 amp.
• Primary fuse (internal) is rated at 5 amp/250V.

Power:

• Eight (8) PoE complaint ports.
• Power Outputs: Eight (8) ports rated 15.4W max. per IEEE 802.3af. Two (2) of the ports are selectable for 30W to accommodate non-PoE compliant IP fixed or PTZ cameras (requires NetWay3012 adapter for each camera port).
• Unit provides up to 15.4W max. power per port. IEEE 802.3af compliant.
• Short circuit protection.

Features:

• Easy plug and play installation.
• Safe and cost effective power distribution over CAT5/5E/6 LAN infrastructure.
• Automatic detection and protection of legacy non-PoE cameras.
• Port status LED indicators.
• Illuminated master power disconnect circuit breaker with manual reset (switch).
• IEC 320 - Detachable 3-wire grounded line (power) cord.
• Unit can be rack or shelf mounted.
• 1U rack mount chassis for use in standard EIA 19" rack.

Miscellaneous:

• Shipping weight: 6.45 lbs.
• Dimensions: 1.625"H x 19.125"W x 8.5"D
• Warranty: LIMITED LIFETIME