Interlogix NS3550-2T-8S 8+2 Industrial Gigabit Fiber Managed Switch

The IFS NS3550-2T-8S is an Industrial Gigabit Fiber Managed Switch equipped with eight 100/1000Mbps SFP (fiber) ports and two 10/100/1000Mbps RJ45 ports.

This is a fully managed Layer 2 switch that provides a robust industrial hardened design that for rapid operational recovery in the event of a network or power system failure.

Layer 2 Managed Switch

The IFS Industrial Gigabit Managed Switch Series supports advanced features including IEEE 802.1Q VLAN, GVRP, port link aggregation, QoS, broadcast storm control and MAC address filtering. The series also includes IGMP snooping and querying multi-casting for media operations and bandwidth utilization to fi t a variety of applications. Via aggregation of supporting ports, the series allows the operation of high-speed trunk operation combining multiple ports. A maximum of four ports can be assigned for four trunk groups and support fail-over as well. Additionally, its standards-compliant implementation ensures interoperability with equipment from other vendors.

Industrial-grade Network Redundancy and Recovery

These switches not only incorporate the industry standard Rapid Spanning Tree Protocol (IEEE 802.1w RSTP), but also an advanced Industrial Fail-Safe (IFS) technology accommodating multiple redundant ring topologies and improved network recovery time of less than 20ms. The switches incorporate a redundant power supply system to further enhance network reliability and up-time. Ideal for use in implementing highly fault-tolerant ring and mesh network architectures, these switches are well suited for harsh environments such as industrial security, factory automation and intelligent transportation systems (ITS).

Robust Hardened Design

With an IP-30 rated enclosure, IFS Industrial Gigabit Managed Switches provide a high level of immunity against electromagnetic (EMI) and radio-frequency (RFI) interference typically found in industrial environments. This series of switches comply with IEC60068-2-xx standards for free-fall, shock, and vibration and operate in -40 degree C~75 degree C temperatures found in difficult environments such as plant floors or in curbside traffic control cabinets.

Product Features

• 8-ports SFP (fiber) 100/1000Base-X and 2-ports 10/100/1000Base-T
• Auto MDI/MDI-X
• Auto-negotiation
• (1) RJ-45 Console Port
• IP30 Aluminum Metal Case Protection
• DIN-rail and Wall Mount Design
• 48VDC, Redundant Power w/Polarity Reverse Protect Function
• Prevents Packet Loss w/Back Pressure (Half-Duplex) and IEEE 802.3x PAUSE Frame Flow Control (Full-Duplex)
• High Performance of Store-and-Forward Architecture and Runt/CRC Filtering Eliminate Erroneous Packets to Optimize the Network Bandwidth
• Storm Control Support
• Ingress Shaper and Egress Rate Limit per Port Bandwidth Control
• 8 Priority Queues on All Switch Ports
• Traffic Classification
• Supports IGMP Snooping v1, v2 and v3
• Supports MLD Snooping v1 and v2
• Querier Mode Support
• IEEE 802.1x Port-Based / MAC-Based Network Access Authentication
• Built-in RADIUS Client to Co-operate w/the RADIUS Servers
• TACACS+ Log-in Users Access Authentication
• Switch Management Interfaces
• Console / Telnet Command Line Interface
• Web Switch Management