NVT NV-215J-M Single Channel Passive Video Transceiver w/9-inch Mini
Product Highlights
This item is discontinued. Call (866) 440-2288 for Replacement
The NVT Model NV-215J-M Video Transceiver is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.
The passive NV-215J-M has a 9" mini-coax pigtail lead which allows in-camera enclosure mounting in most dome cameras and a RJ45 for connection to UTP wire. It is capable of delivering a fully equalized signal to the DVR when used with any Active NVT Receiver, yet is compatible with all of NVT's passive products for applications under 750ft (225m). The NV-215J-M Video Transceiver also incorporates improved transient protection that eliminates the need for a ground screw.
The unparalleled interference rejection and low emissions of the NV-215J-M allow video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant.
-
Full-motion CCTV video at distances up to 750ft (225m) when used with any Passive NVT Transceiver or hub
- Up to 1,500 feet (460m) shall be supported by any NVT StubEQ(tm) Hub
- Up to 3,000 feet (1,000m) with a DigitalEQ(tm) Hub or NVT Active Receiver
- Frequency response DC to 10MHz
- Mini-coax pigtail supports in-camera mounting in most dome cameras
- RJ45 UTP terminal connection
- No power required
- Exceptional interference rejection
- Built-in transient protection
- Supports "up-the-coax" type control signal up to 750ft (225m)
- Limited lifetime warranty
Downloads
| Condition | New |
|---|---|
| Brand | NVT |
| NDAA Compliance | No |
| Balun Type | Transceiver Balun |
| Channels | 1 |
| Type | Passive |
| Rack Mountable | No |
| Product Type | Passive Transceiver |
| Channels | 1 |
| Connection Type | BNC, RJ-45 |
| Form | Stand - Alone |
The NVT Model NV-215J-M Video Transceiver is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.
The passive NV-215J-M has a 9" mini-coax pigtail lead which allows in-camera enclosure mounting in most dome cameras and a RJ45 for connection to UTP wire. It is capable of delivering a fully equalized signal to the DVR when used with any Active NVT Receiver, yet is compatible with all of NVT's passive products for applications under 750ft (225m). The NV-215J-M Video Transceiver also incorporates improved transient protection that eliminates the need for a ground screw.
The unparalleled interference rejection and low emissions of the NV-215J-M allow video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant.
-
Full-motion CCTV video at distances up to 750ft (225m) when used with any Passive NVT Transceiver or hub
- Up to 1,500 feet (460m) shall be supported by any NVT StubEQ(tm) Hub
- Up to 3,000 feet (1,000m) with a DigitalEQ(tm) Hub or NVT Active Receiver
- Frequency response DC to 10MHz
- Mini-coax pigtail supports in-camera mounting in most dome cameras
- RJ45 UTP terminal connection
- No power required
- Exceptional interference rejection
- Built-in transient protection
- Supports "up-the-coax" type control signal up to 750ft (225m)
- Limited lifetime warranty
Downloads
| Condition | New |
|---|---|
| Brand | NVT |
| NDAA Compliance | No |
| Balun Type | Transceiver Balun |
| Channels | 1 |
| Type | Passive |
| Rack Mountable | No |
| Product Type | Passive Transceiver |
| Channels | 1 |
| Connection Type | BNC, RJ-45 |
| Form | Stand - Alone |
Customers also viewed
Check items to add to the cart or select all
