NVT NV-217J-M Single Channel Passive Transceiver, RJ45
Product Highlights
The NVT Model NV-217J-M Video Transceiver is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) data wire. Baseband (composite) signals of any type are supported.
The passive NV-217J-M features a RJ45 connection and Male BNC allowing connection directly to the camera or DVR. It is capable of delivering a fully equalized signal to the DVR when used with any Active NVT Receiver, yet is compatible with all of NVT's passive products for applications under 750ft (225m). The NV-217J-M Video Transceiver also incorporates improved transient protection that eliminates the need for a ground screw.
The unparalleled interference rejection and low emissions of the NV-217J-M allow video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant.
- Full-motion CCTV video at distances up to 750ft (225m) when used with any Passive NVT Transceiver or hub
- Up to 1,500 feet (460m) shall be supported by any NVT StubEQ(tm) Hub
- Up to 3,000 feet (1,000m) with a DigitalEQ(tm) Hub or NVT Active Receiver
- Frequency response DC to 10MHz
- Male BNC allows connection directly to the camera or DVR
- RJ45 UTP terminal connection
- No power required Exceptional interference rejection
- Built-in transient protection
- Supports "up-the-coax" type control signal up to 750ft (225m)
- Limited lifetime warranty
Downloads
Condition | New |
---|---|
Brand | NVT |
Balun Type | Transceiver Balun |
Channels | 1 |
Type | Passive |
Rack Mountable | No |
Product Type | Passive Transceiver |
Channels | 1 |
Connection Type | BNC, RJ-45 |
Form | Stand - Alone |
The NVT Model NV-217J-M Video Transceiver is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) data wire. Baseband (composite) signals of any type are supported.
The passive NV-217J-M features a RJ45 connection and Male BNC allowing connection directly to the camera or DVR. It is capable of delivering a fully equalized signal to the DVR when used with any Active NVT Receiver, yet is compatible with all of NVT's passive products for applications under 750ft (225m). The NV-217J-M Video Transceiver also incorporates improved transient protection that eliminates the need for a ground screw.
The unparalleled interference rejection and low emissions of the NV-217J-M allow video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant.
- Full-motion CCTV video at distances up to 750ft (225m) when used with any Passive NVT Transceiver or hub
- Up to 1,500 feet (460m) shall be supported by any NVT StubEQ(tm) Hub
- Up to 3,000 feet (1,000m) with a DigitalEQ(tm) Hub or NVT Active Receiver
- Frequency response DC to 10MHz
- Male BNC allows connection directly to the camera or DVR
- RJ45 UTP terminal connection
- No power required Exceptional interference rejection
- Built-in transient protection
- Supports "up-the-coax" type control signal up to 750ft (225m)
- Limited lifetime warranty
Downloads
Condition | New |
---|---|
Brand | NVT |
Balun Type | Transceiver Balun |
Channels | 1 |
Type | Passive |
Rack Mountable | No |
Product Type | Passive Transceiver |
Channels | 1 |
Connection Type | BNC, RJ-45 |
Form | Stand - Alone |