Check items to add to the cart or select all
The NVT Model NV-413A 4-channel Video Transceivers is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.
"Up-the-coax" type signal may be sent over the same wire pair. Used as a receiver, the NV-413A is fully compatible with qualified cameras that are equipped with an NVT twisted-pair output.
The unparalleled interference rejection and low emissions of the Model NV-413A allow video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant. With built-in transient protection, damaging voltage spike problems are eliminated.
- Four passive transceiver channels in one product
- Full-motion CCTV video at distances up to 750ft (225m) when used with a passive NVT transceiver or hub
- Up to 3,000 feet (1,000 m) with a DigitalEQTM Hub or active receiver
- Up to 1,500 feet (460m) shall be supported by any NVT StubEQTM Hub
- Supports pluggable screw terminal or RJ45 connections
- No power required
- Exceptional interference rejection
- Built-in transient protection
- Supports "up-the-coax" type control signal up to 750ft (225m)
- Compatible with qualified UTP cameras
- Two NV-413As may be rack mounted using the NV-RM8/10 Rack Panel Kit
- Limited lifetime warranty
Downloads
 |
NV-413A Spec Sheet (Size: 135.6 KB) | |
|
NVT CCTV Product Installation Guide (Size: 258.6 KB) |
Additional Information
| Product SKU | NV-413A |
|---|---|
| Brand | NVT |
| Condition | New |
| Balun Type | Transceiver Balun |
| Channels | 4 |
| Type | Passive |
| Product Type | Passive Transceiver |
| Channels | 4 |
| Connection Type | BNC, RJ-45, Screw Terminals |
Accessories
Keep in Touch
Be sure to follow us on social media for exclusives!
