Loading...

NVT NV-872 8 Channel Digital EQ Active Receiver Distribution Amplifier

NVT   |   SKU: NV-872   |   Model: NV-872

Product Highlights

NVT NV-872 8 Channel Digital EQ Active Receiver Distribution Amplifier
Qty:
$1,468.28

Usually ships within 24 hours

  • Free Lifetime Support
  • Free Warranty & Repair Service
  • Call for Bulk Pricing
Express Checkout:

Employing NVT's latest generation Digital EQ(tm) technology, the NV-872 is an 8-channel active (amplified) hub that allows the transmission of full-motion monochrome or color video for distances up to 1 mile (1,6km) using Category 2 or better unshielded twisted-pair (UTP) wire. The receiver hub continuously and automatically conditions the video signal, compensating for cable attenuation, wiring polarity, ground loops, and voltage transients, independent of video signal content.

The unparalleled interference rejection and low emissions allow long run video to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of shared or existing cable plant. Ground-lifting ensures no annoying "hum-bars" when ground-potential differences exist. With built-in transient protection, damaging voltage spikes are eliminated.

  • Adaptive DigitalEQ(tm) fully automatic 4-band equalization continuously provides adjustment-free equalization
  • Compact rack-mountable 19" 1U high enclosure features 8 channels with 4 outputs per channel
  • Full motion CCTV video at distances up to 3,000ft (1km) when used with any passive NVT transceiver or hub; 1 mile (1,6km) when used with the NV-653T active transmitter; 1,000ft (300m) with shielded twisted-pair when used with any passive NVT transceiver or hub
  • RJ45 connectivity with optional NV-RJ45A RJ45-to-screw-terminal adaptors (included)
  • Exceptional interference rejection
  • Built-in transient protection and ground-lifting
  • Automatic compensation for reverse-polarity wiring
  • At-a-glance per-channel diagnostics
  • Compatible with qualified UTP cameras
  • Includes eight 2ft (60cm) coax jumper cables, rack mount hardware and two NV-RJ45A adaptors
  • Lifetime Limited Warranty

Downloads

Condition New
Brand NVT
Balun Type Receiver Hub, Distribution Hub
Channels 8
Type Active
Input Voltage 115 VAC, 230 VAC
Rack Mountable Yes
Product Type Active Receiver Hub
Channels 8
Connection Type BNC, RJ-45, Screw Terminals
Form Rack Mount

Employing NVT's latest generation Digital EQ(tm) technology, the NV-872 is an 8-channel active (amplified) hub that allows the transmission of full-motion monochrome or color video for distances up to 1 mile (1,6km) using Category 2 or better unshielded twisted-pair (UTP) wire. The receiver hub continuously and automatically conditions the video signal, compensating for cable attenuation, wiring polarity, ground loops, and voltage transients, independent of video signal content.

The unparalleled interference rejection and low emissions allow long run video to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of shared or existing cable plant. Ground-lifting ensures no annoying "hum-bars" when ground-potential differences exist. With built-in transient protection, damaging voltage spikes are eliminated.

  • Adaptive DigitalEQ(tm) fully automatic 4-band equalization continuously provides adjustment-free equalization
  • Compact rack-mountable 19" 1U high enclosure features 8 channels with 4 outputs per channel
  • Full motion CCTV video at distances up to 3,000ft (1km) when used with any passive NVT transceiver or hub; 1 mile (1,6km) when used with the NV-653T active transmitter; 1,000ft (300m) with shielded twisted-pair when used with any passive NVT transceiver or hub
  • RJ45 connectivity with optional NV-RJ45A RJ45-to-screw-terminal adaptors (included)
  • Exceptional interference rejection
  • Built-in transient protection and ground-lifting
  • Automatic compensation for reverse-polarity wiring
  • At-a-glance per-channel diagnostics
  • Compatible with qualified UTP cameras
  • Includes eight 2ft (60cm) coax jumper cables, rack mount hardware and two NV-RJ45A adaptors
  • Lifetime Limited Warranty

Downloads

Condition New
Brand NVT
Balun Type Receiver Hub, Distribution Hub
Channels 8
Type Active
Input Voltage 115 VAC, 230 VAC
Rack Mountable Yes
Product Type Active Receiver Hub
Channels 8
Connection Type BNC, RJ-45, Screw Terminals
Form Rack Mount

Customers also viewed

Check items to add to the cart or select all