Pelco NET104A Multimedia Transmission Via Networks
Product Highlights
Pelco NET104A | Four Video Channels to Display/Transmit Single or Quad Views; Also Sequences Images | Relay Output for Switching External Devices (such as a door lock, etc.). Buy Now.
The NET104A from Pelco is a transmission System transmits live video, data, and audio across existing Ethernet networks. Sending video and audio over computer networks yields significant cost savings by using an existing computer network to monitor a remote site. NET104A has four channels, so it works with up to four video sources. It can multiplex to provide a single view, sequence of views, or a quad view. With minimal setup, the NET104A Transmission System can be installed and running in minutes. Connect cameras to the transmitter and a monitor to a standard PelcoNet NET101 Series receiver. Then connect the transmitter and receiver to the network and configure IP addresses for the equipment using a standard terminal program or any Internet browser.
Features
- Send and Receive Live Video, Audio, and Data Over Ethernet Networks
- Four Video Channels to Display/Transmit Single or Quad Views; Also Sequences Images
- Four Alarm Inputs for External Detectors
- Relay Output for Switching External Devices (such as a door lock, etc.)
- View the Picture on a PC or CCTV Monitor
- Control a PTZ, Genex Multiplexer, or Matrix Within a Building or Across the Country
- Autonomous System Does Not Require a PC to Transmit
- Uses TCP/IP Protocol
- Multicast Function Allows Simultaneous Connection of
- Multiple Receivers, Including up to Five Viewers of Live Video
- Up to 30 High Quality Images Per Second
- Manually Record and Play Back Camera on a PC's Hard Drive
- Select Specific Areas in the Display for Motion Detection
| Condition | New |
|---|---|
| Brand | Pelco |
| NDAA Compliance | Yes |
| Integral Camera Power | With Power |
| Channels | 4 |
| Connection Type | RJ-45 |
| Form | Stand-Alone |
Pelco NET104A | Four Video Channels to Display/Transmit Single or Quad Views; Also Sequences Images | Relay Output for Switching External Devices (such as a door lock, etc.). Buy Now.
The NET104A from Pelco is a transmission System transmits live video, data, and audio across existing Ethernet networks. Sending video and audio over computer networks yields significant cost savings by using an existing computer network to monitor a remote site. NET104A has four channels, so it works with up to four video sources. It can multiplex to provide a single view, sequence of views, or a quad view. With minimal setup, the NET104A Transmission System can be installed and running in minutes. Connect cameras to the transmitter and a monitor to a standard PelcoNet NET101 Series receiver. Then connect the transmitter and receiver to the network and configure IP addresses for the equipment using a standard terminal program or any Internet browser.
Features
- Send and Receive Live Video, Audio, and Data Over Ethernet Networks
- Four Video Channels to Display/Transmit Single or Quad Views; Also Sequences Images
- Four Alarm Inputs for External Detectors
- Relay Output for Switching External Devices (such as a door lock, etc.)
- View the Picture on a PC or CCTV Monitor
- Control a PTZ, Genex Multiplexer, or Matrix Within a Building or Across the Country
- Autonomous System Does Not Require a PC to Transmit
- Uses TCP/IP Protocol
- Multicast Function Allows Simultaneous Connection of
- Multiple Receivers, Including up to Five Viewers of Live Video
- Up to 30 High Quality Images Per Second
- Manually Record and Play Back Camera on a PC's Hard Drive
- Select Specific Areas in the Display for Motion Detection
| Condition | New |
|---|---|
| Brand | Pelco |
| NDAA Compliance | Yes |
| Integral Camera Power | With Power |
| Channels | 4 |
| Connection Type | RJ-45 |
| Form | Stand-Alone |
Customers also viewed
Check items to add to the cart or select all
