Interlogix POC252-1CX-1P Power over Coax (Camera End) Media Convertor
Product Highlights
IP power over coax (camera end) media convertor with 1-port tp PoE-at. The IFS Power over Coax Media Converters from Interlogix are designed to transmit both Ethernet data and power transmission over coax cable up to 3,281 ft. (1Km). This solution provides a cost-effective way to reduce installation costs and increase ROI by utilizing existing coax to migrate an analog video system to an IP surveillance system.
The POC252-1CX-1P Power over Coax Media Converter is for use at the camera end to convert the data/power from the coax. The media converter provides 10/100Mbps data and IEEE 802.3-af/at compliant power on the RJ45 port for an IP camera.
Coax Ports
- 1 BNC ports
- IEEE 1901 standard compliant for power
- Wavelet-OFDM modulation
- 128-bit AES security encryption
- Daisy-chain (up to 4 devices on one link)
Ethernet Ports
- 10/100Mbps Ethernet
- Auto-negotiation and auto-MDI/MDI-X
- Half-duplex back pressure and IEEE802.3x full-duplex
- pause-frame fl ow control
Power over Ethernet
- IEEE 802.3-af/at compliant on RJ45 Ethernet port
- Up to 440W total power budget (dependent on switch model)
- Remote power up to 3,281 ft. (1Km) with RG6 75Ω coaxial cable
- Full PoE management - Total power budget control - Power enable/disable per port - Power priority per port - Power limitation per port - Power scheduling per port - PD alive-checking
Downloads
Condition | New |
---|---|
Brand | Interlogix |
NDAA Compliance | Yes |
Technology | Digital - IP |
Item Type | Ethernet to Coax |
Environment | Unhardened |
Data Rate | 10/100 Mbps |
Ports | 1-Port |
Form Factor | Surface |
Connectors | BNC, RJ-45 |
Number of Ports | 1 |
PoE | Yes |
Input Power | DC |
Remote Management | Yes |
Function | IP and Power over Coax |
Unit Type | Transmitter |
IP power over coax (camera end) media convertor with 1-port tp PoE-at. The IFS Power over Coax Media Converters from Interlogix are designed to transmit both Ethernet data and power transmission over coax cable up to 3,281 ft. (1Km). This solution provides a cost-effective way to reduce installation costs and increase ROI by utilizing existing coax to migrate an analog video system to an IP surveillance system.
The POC252-1CX-1P Power over Coax Media Converter is for use at the camera end to convert the data/power from the coax. The media converter provides 10/100Mbps data and IEEE 802.3-af/at compliant power on the RJ45 port for an IP camera.
Coax Ports
- 1 BNC ports
- IEEE 1901 standard compliant for power
- Wavelet-OFDM modulation
- 128-bit AES security encryption
- Daisy-chain (up to 4 devices on one link)
Ethernet Ports
- 10/100Mbps Ethernet
- Auto-negotiation and auto-MDI/MDI-X
- Half-duplex back pressure and IEEE802.3x full-duplex
- pause-frame fl ow control
Power over Ethernet
- IEEE 802.3-af/at compliant on RJ45 Ethernet port
- Up to 440W total power budget (dependent on switch model)
- Remote power up to 3,281 ft. (1Km) with RG6 75Ω coaxial cable
- Full PoE management - Total power budget control - Power enable/disable per port - Power priority per port - Power limitation per port - Power scheduling per port - PD alive-checking
Downloads
Condition | New |
---|---|
Brand | Interlogix |
NDAA Compliance | Yes |
Technology | Digital - IP |
Item Type | Ethernet to Coax |
Environment | Unhardened |
Data Rate | 10/100 Mbps |
Ports | 1-Port |
Form Factor | Surface |
Connectors | BNC, RJ-45 |
Number of Ports | 1 |
PoE | Yes |
Input Power | DC |
Remote Management | Yes |
Function | IP and Power over Coax |
Unit Type | Transmitter |