Interlogix POC252-1CXP-1T Power over Coax (Head End) Media Convertor
Product Highlights
The IFS Power over Coax Media Converters from Interlogix are designed to transmit both Ethernet data and power transmission over coax cable up to 3,281 ft. (1Km). This solution provides a cost-effective way to reduce installation costs and increase ROI by utilizing existing coax to migrate an analog video system to an IP surveillance system.
The POC252-1CXP-1T Power over Coax Media Converter transmits data and injects power over coax for use with the POC252-1CX-1P. This media converter is used to deploy a single IP camera on a length of coax cable when a multi-port BNC switch is not needed.
Coax Ports
- 1 BNC ports
- IEEE 1901 standard compliant for power
- Wavelet-OFDM modulation
- 128-bit AES security encryption
- Daisy-chain (up to 4 devices on one link)
Ethernet Ports
- 10/100Mbps Ethernet
- Auto-negotiation and auto-MDI/MDI-X
- Half-duplex back pressure and IEEE802.3x full-duplex
- pause-frame fl ow control
Power over Ethernet
- IEEE 802.3-af/at compliant on RJ45 Ethernet port
- Up to 440W total power budget (dependent on switch model)
- Remote power up to 3,281 ft. (1Km) with RG6 75Ω coaxial cable
- Full PoE management - Total power budget control - Power enable/disable per port - Power priority per port - Power limitation per port - Power scheduling per port - PD alive-checking
Downloads
Condition | New |
---|---|
Brand | Interlogix |
NDAA Compliance | Yes |
Technology | Digital - IP |
Item Type | Ethernet to Coax |
Environment | Unhardened |
Data Rate | 10/100 Mbps |
Ports | 1-Port |
Form Factor | Surface |
Connectors | BNC, RJ-45 |
Number of Ports | 1 |
PoE | Yes |
Input Power | DC |
Remote Management | Yes |
Function | IP and Power over Coax |
Unit Type | Transmitter |
The IFS Power over Coax Media Converters from Interlogix are designed to transmit both Ethernet data and power transmission over coax cable up to 3,281 ft. (1Km). This solution provides a cost-effective way to reduce installation costs and increase ROI by utilizing existing coax to migrate an analog video system to an IP surveillance system.
The POC252-1CXP-1T Power over Coax Media Converter transmits data and injects power over coax for use with the POC252-1CX-1P. This media converter is used to deploy a single IP camera on a length of coax cable when a multi-port BNC switch is not needed.
Coax Ports
- 1 BNC ports
- IEEE 1901 standard compliant for power
- Wavelet-OFDM modulation
- 128-bit AES security encryption
- Daisy-chain (up to 4 devices on one link)
Ethernet Ports
- 10/100Mbps Ethernet
- Auto-negotiation and auto-MDI/MDI-X
- Half-duplex back pressure and IEEE802.3x full-duplex
- pause-frame fl ow control
Power over Ethernet
- IEEE 802.3-af/at compliant on RJ45 Ethernet port
- Up to 440W total power budget (dependent on switch model)
- Remote power up to 3,281 ft. (1Km) with RG6 75Ω coaxial cable
- Full PoE management - Total power budget control - Power enable/disable per port - Power priority per port - Power limitation per port - Power scheduling per port - PD alive-checking
Downloads
Condition | New |
---|---|
Brand | Interlogix |
NDAA Compliance | Yes |
Technology | Digital - IP |
Item Type | Ethernet to Coax |
Environment | Unhardened |
Data Rate | 10/100 Mbps |
Ports | 1-Port |
Form Factor | Surface |
Connectors | BNC, RJ-45 |
Number of Ports | 1 |
PoE | Yes |
Input Power | DC |
Remote Management | Yes |
Function | IP and Power over Coax |
Unit Type | Transmitter |