Panasonic POSM5V Vandal-Resistant Outdoor Dome Housing with Heater & Blower

The outdoor dome camera housing shall be a Panasonic Model POSM5V or equivalent. The housing shall be designed to fully support the WV-NS202A, WV-NS302, WV-NF284, WV-CF294, WV-SC385 and the BB-HCM403/580/581 camera models. The Panasonic Model POSM5V shall also be equipped with 24VAC input blower and thermostatically controlled heater. The upper dome housing shall be manufactured from a high-impact engineered thermoplastic polycarbonate with a UL flame rating of 94-V0. The dome shall be made of an injection molded, optically clear thermoplastic polycarbonate. The dome shall be held in place with a minimum of three (3) fasteners and a safety cable shall be provided to hold the dome while servicing. Access to the enclosure shall be from below with three (3) captive fasteners used to press the dome against a sealing O-ring. The wiring enters through the top of the housing or through a .875" (for ½" conduit) opening on the side of the housing. The engineered thermoplastic top, with its reflective white paint, insulates internal equipment. On the Panasonic POSM5V models the integrated heater/blower shall be a progressive power model and shall draw 40W maximum power. The heater shall turn on at 60°F (15°C) and turn off at 80°F (27°C). The housing shall support a temperature range of -40°F (-40°C) to 122°F (50°C).

Features

• Easy camera installation. Supports the WV-NS202A, WV-NF302, WV-NF284, WV-CF294, WV-SC385, BBHCM403/580/581
• Compact, vandal-resistant, high-impact polycarbonate construction
• Rugged IP66 rating for camera protection
• Versatile mounting options: choose surface, pendant or wall mount
• 0.875" (for ½" or 16mm conduit) side knock-out conduit opening
• High efficiency, thermostatically controlled H&B with separate power inputs for H&B and camera on outdoor models
• Optically transparent, UV-stabilized, thermoplastic polycarbonate capsule. Available in clear or smoked