Altronix EFLOW102NB Single Output Power Supply Charger, 12VDC @ 10A, 115VAC, Board
Altronix
|
SKU: EFLOW102NB
|
Model: EFLOW102NB
Product Highlights
Altronix EFLOW102NB Off-Line Switching Power Supply/Charger
Express Checkout:
The eFlow102NB power supply/charger converts a 115VAC / 60Hz input to a 12VDC @ 10 amp output.
Features
- Input 120VAC 60Hz, 3.5 amp
- 12VDC output
- 10 amp continuous supply current
- Aux. power-limited output rated @ 1 amp (unswitched)
- Over Voltage Protection
- Filtered and electronically regulated outputs
- Built-in charger for sealed lead acid or gel type batteries
- Maximum charge current 1.54 amp
- Automatic switch over to stand-by battery when AC fails
- Transfer to stand-by battery power is instantaneous with no interruption
- Supervised Fire Alarm disconnect (latching or nonlatching) 10K EOL resistor. Operates on a normally open (NO) or normally closed (NC) trigger
- AC fail supervision (form "C" contacts)
- Battery fail & presence supervision (form "C" contacts)
- Low power shutdown. Shuts down DC output terminals if battery voltage drops below 80% of nominal. Prevents deep battery discharge
- Green AC Power LED indicates 120VAC present
- AC input and DC output LED indicators
- Short circuit and overload protection
Downloads
| Condition | New |
|---|---|
| Brand | Altronix |
| Output Type | DC |
| Fire Alarm Interface | Yes |
| Certifications | cUL, UL |
| Power Options | 10 amp @ 12VDC |
| Output Protection | Electronic |
| Number of Outputs | 1 |
| Input Voltage | 115VAC |
| Battery Charging | Yes |
The eFlow102NB power supply/charger converts a 115VAC / 60Hz input to a 12VDC @ 10 amp output.
Features
- Input 120VAC 60Hz, 3.5 amp
- 12VDC output
- 10 amp continuous supply current
- Aux. power-limited output rated @ 1 amp (unswitched)
- Over Voltage Protection
- Filtered and electronically regulated outputs
- Built-in charger for sealed lead acid or gel type batteries
- Maximum charge current 1.54 amp
- Automatic switch over to stand-by battery when AC fails
- Transfer to stand-by battery power is instantaneous with no interruption
- Supervised Fire Alarm disconnect (latching or nonlatching) 10K EOL resistor. Operates on a normally open (NO) or normally closed (NC) trigger
- AC fail supervision (form "C" contacts)
- Battery fail & presence supervision (form "C" contacts)
- Low power shutdown. Shuts down DC output terminals if battery voltage drops below 80% of nominal. Prevents deep battery discharge
- Green AC Power LED indicates 120VAC present
- AC input and DC output LED indicators
- Short circuit and overload protection
Downloads
| Condition | New |
|---|---|
| Brand | Altronix |
| Output Type | DC |
| Fire Alarm Interface | Yes |
| Certifications | cUL, UL |
| Power Options | 10 amp @ 12VDC |
| Output Protection | Electronic |
| Number of Outputs | 1 |
| Input Voltage | 115VAC |
| Battery Charging | Yes |
Customers also viewed
Check items to add to the cart or select all
Pelco 13VD1-3 1.6-3.4mm Direct Drive Auto Iris, Spot Filter, CS-Mount
was
$302.00
Special Price
$179.64
