Altronix AL1024ULX Single Output Power Supply/Charger, 24VDC
Altronix
|
SKU: Al1024ULX
|
Model: Al1024ULX
Product Highlights
Altronix AL1024ULX Single Output Power Supply/Charger, 24VDC
AL1024ULX is a power supply/charger that converts a 115VAC, 60Hz input into a single 24VDC non-power limited output.
Input
- Input 115VAC, 60Hz, 4.2 amp
- Input fuse rated @ 3.5 amp/250V
Output
- 24VDC output
- 10 amp of continuous supply current for Access Control applications
- 8 amp of continuous supply current for Fire Alarm applications
- Filtered and electronically regulated output
- Short circuit and thermal overload protection
Battery Backup
- Built-in charger for sealed lead acid or gel type batteries
- Automatic switch over to stand-by battery when AC fails
- Maximum charge current 3.6 amp
Supervision
- AC fail supervision (form "C" contacts): Notification trigger is selectable for 30 seconds (factory set) or 6 hours
- Low battery supervision (form "C" contacts)
Visual Indicators
- AC input and DC output LED indicators
Electrical
- Operating temperature: 0C to 49C ambient
- 122.84 BTU/Hr
- System AC input VA requirement: 483VA
Downloads
(Size: 165.1 KB)
(Size: 432.5 KB)
Condition | New |
---|---|
Brand | Altronix |
Power Supply Type | Cabinet, Wall Mount |
# of Outputs | 1 |
Input Voltage | 115 VAC |
Output Voltage | 24 VDC |
Output Current | 8.0 Amp, 10.0 Amp |
Features | Mini Cabinet, UL Listed |
Output Type | DC |
Fire Alarm Interface | No |
Certifications | CSFM, FM Approved, MEA, UL |
Power Options | 10 amp @ 24VDC |
Output Protection | Electronic |
Number of Outputs | 1 |
Input Voltage | 115VAC |
Version | Indoor Wallmount |
Battery Charging | Yes |
- (1) Power Supply
- Lifetime Warranty
Write Your Own Review
AL1024ULX is a power supply/charger that converts a 115VAC, 60Hz input into a single 24VDC non-power limited output.
Input
- Input 115VAC, 60Hz, 4.2 amp
- Input fuse rated @ 3.5 amp/250V
Output
- 24VDC output
- 10 amp of continuous supply current for Access Control applications
- 8 amp of continuous supply current for Fire Alarm applications
- Filtered and electronically regulated output
- Short circuit and thermal overload protection
Battery Backup
- Built-in charger for sealed lead acid or gel type batteries
- Automatic switch over to stand-by battery when AC fails
- Maximum charge current 3.6 amp
Supervision
- AC fail supervision (form "C" contacts): Notification trigger is selectable for 30 seconds (factory set) or 6 hours
- Low battery supervision (form "C" contacts)
Visual Indicators
- AC input and DC output LED indicators
Electrical
- Operating temperature: 0C to 49C ambient
- 122.84 BTU/Hr
- System AC input VA requirement: 483VA
Downloads
(Size: 165.1 KB)
(Size: 432.5 KB)
Condition | New |
---|---|
Brand | Altronix |
Power Supply Type | Cabinet, Wall Mount |
# of Outputs | 1 |
Input Voltage | 115 VAC |
Output Voltage | 24 VDC |
Output Current | 8.0 Amp, 10.0 Amp |
Features | Mini Cabinet, UL Listed |
Output Type | DC |
Fire Alarm Interface | No |
Certifications | CSFM, FM Approved, MEA, UL |
Power Options | 10 amp @ 24VDC |
Output Protection | Electronic |
Number of Outputs | 1 |
Input Voltage | 115VAC |
Version | Indoor Wallmount |
Battery Charging | Yes |
- (1) Power Supply
- Lifetime Warranty
Write Your Own Review