Seco-Larm EAP-5D1Q Access Control Power Supply
SECO-LARM
|
SKU: EAP-5D1Q
|
Model: EAP-5D1Q
Product Highlights
Seco-Larm EAP-5D1Q Access Control Power Supply
Seco-Larm EAP-5D1Q Access Control Power Supply is available to buy in increments of 2
Access Control Power Supply. 12 or 24 VDC output voltage. 1 Output, 5A@12VDC (2.5A@24VDC). Heavy-duty steel case.1 Output, 5A@12VDC, 2.5A@24VDC (field switchable) with enclosure
- AC power failure supervision relay
- Battery failure supervision relay
- Selectable 2.2KΩ End-of-Line (EOL) resistor for AC failure and battery failure supervision relays via DIP switch
- Selectable delay timer (5 sec., 5 min., 5 hours) for AC failure supervision relay via DIP switch
- Board designed with overload and short-circuit protection, including automatic shutdown and LED overload indicator
- Over-current fuse-protected AC input
- Built-in back-up battery charger (back-up battery is optional)
- Automatically switch to back-up battery if AC fails
- Individual AC input and DC output LED status indicators
Downloads
| Condition | New |
|---|---|
| Brand | SECO-LARM |
| Output Type | DC |
| Fire Alarm Interface | No |
| Power Options | 2.5 amp @ 24VDC, 5 amp @ 12VDC |
| Output Protection | Fuse |
| Number of Outputs | 1 |
| Input Voltage | 110-240VAC |
| Version | Indoor Wallmount |
| Battery Charging | Yes |
Write Your Own Review
Access Control Power Supply. 12 or 24 VDC output voltage. 1 Output, 5A@12VDC (2.5A@24VDC). Heavy-duty steel case.1 Output, 5A@12VDC, 2.5A@24VDC (field switchable) with enclosure
- AC power failure supervision relay
- Battery failure supervision relay
- Selectable 2.2KΩ End-of-Line (EOL) resistor for AC failure and battery failure supervision relays via DIP switch
- Selectable delay timer (5 sec., 5 min., 5 hours) for AC failure supervision relay via DIP switch
- Board designed with overload and short-circuit protection, including automatic shutdown and LED overload indicator
- Over-current fuse-protected AC input
- Built-in back-up battery charger (back-up battery is optional)
- Automatically switch to back-up battery if AC fails
- Individual AC input and DC output LED status indicators
Downloads
| Condition | New |
|---|---|
| Brand | SECO-LARM |
| Output Type | DC |
| Fire Alarm Interface | No |
| Power Options | 2.5 amp @ 24VDC, 5 amp @ 12VDC |
| Output Protection | Fuse |
| Number of Outputs | 1 |
| Input Voltage | 110-240VAC |
| Version | Indoor Wallmount |
| Battery Charging | Yes |
Write Your Own Review
