Loading...

Altronix ACMS8CB 8 PTC Protected Outputs, Access Power Controller, Board

Altronix   |   SKU: ACMS8CB   |   Model: ACMS8CB

Product Highlights

Altronix ACMS8CB 8 PTC Protected Outputs, Access Power Controller, Board
Qty:
$122.20
Add to Quote

Usually ships within 1-2 Weeks + Shipping Method

  • Free Lifetime Support
  • Free Warranty & Repair Service
  • Call for Bulk Pricing
Express Checkout:

Altronix ACMS8 and ACMS8CB dual input design allows power to be steered from two (2) independent low voltage 5 to 24 VDC power sources into eight (8) independently controlled PTC protected outputs. In ACMS8, these power outputs can also be converted to dry form “C” contacts. Outputs are activated by an open collector sink, normally open (NO) or normally closed (NC) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. ACMS8/ACMS8CB will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the eight (8) outputs. The spade connectors allow you to daisy chain power to multiple ACMS8/ACMS8CB modules. This feature allows you to distribute the power over more outputs for larger systems.

Features

  • Input 1 and Input 2 voltage range: 5VDC to 24VDC, up to 10A each or 16A total input
  • PTC protected outputs rated @ 2A per output, Class 2 power-limited Total output 16A max
  • Do not exceed the individual power supply ratings
  • Total output current should not exceed max current rating of the power supplies employed on each input
  • Individual outputs may be set to OFF position for servicing (output jumper set to middle position)
  • Does not apply to Dry Contact applications
  • Any of the eight (8) PTC protected power outputs are selectable to follow power Input 1 or Input 2
  • Output voltage of each output is the same as the input voltage of the input selected
  • Surge suppression
  • Fire Alarm disconnect (latching or non-latching) is individually selectable for any or all of the eight (8) outputs
  • Output ratings: PTC are rated 2A each
  • Red LEDs indicate outputs are triggered
  • Blue LED indicates FACP disconnect is triggered
Condition New
Brand Altronix
Output Type DC
Fire Alarm Interface Yes
Power Options 2 amp @ 24VDC, 2 amp @ 5VDC
Output Protection PTC
Number of Outputs 8
Input Voltage 5-24VDC
Battery Charging No

Altronix ACMS8 and ACMS8CB dual input design allows power to be steered from two (2) independent low voltage 5 to 24 VDC power sources into eight (8) independently controlled PTC protected outputs. In ACMS8, these power outputs can also be converted to dry form “C” contacts. Outputs are activated by an open collector sink, normally open (NO) or normally closed (NC) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. ACMS8/ACMS8CB will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the eight (8) outputs. The spade connectors allow you to daisy chain power to multiple ACMS8/ACMS8CB modules. This feature allows you to distribute the power over more outputs for larger systems.

Features

  • Input 1 and Input 2 voltage range: 5VDC to 24VDC, up to 10A each or 16A total input
  • PTC protected outputs rated @ 2A per output, Class 2 power-limited Total output 16A max
  • Do not exceed the individual power supply ratings
  • Total output current should not exceed max current rating of the power supplies employed on each input
  • Individual outputs may be set to OFF position for servicing (output jumper set to middle position)
  • Does not apply to Dry Contact applications
  • Any of the eight (8) PTC protected power outputs are selectable to follow power Input 1 or Input 2
  • Output voltage of each output is the same as the input voltage of the input selected
  • Surge suppression
  • Fire Alarm disconnect (latching or non-latching) is individually selectable for any or all of the eight (8) outputs
  • Output ratings: PTC are rated 2A each
  • Red LEDs indicate outputs are triggered
  • Blue LED indicates FACP disconnect is triggered
Condition New
Brand Altronix
Output Type DC
Fire Alarm Interface Yes
Power Options 2 amp @ 24VDC, 2 amp @ 5VDC
Output Protection PTC
Number of Outputs 8
Input Voltage 5-24VDC
Battery Charging No

Customers also viewed

Check items to add to the cart or select all