Bosch FPP-RNAC-8A-4C 8 Amps 4 Circuit RNAC Power Supply
Product Highlights
This item is discontinued. Call (866) 440-2288 for Replacement
Bosch FPP-RNAC-8A-4C | 8 A of power | Configurable for NAC output or constant auxiliary power | Built-in NAC patterns | 4 Outputs | Fire Alarm Interface. Buy Now.
8 Amps 4 Circuit SRemote Notification Appliance Circuit (RNAC) Power Supply. Use the FPP-RNAC-8A-4C power supply to add four additional notification appliance circuits to a fire alarm control panel (when connected via the option bus), or as a NAC power supply for fire-protective signaling systems (when connected directly to the NAC output). The additional notification appliance circuits can be NFPA 72, Class B (Style Y) or Class A (Style Z). This regulated power supply provides up to 8 A of power that is used to operate both continuous and intermittent loads. This 8 A of power can be distributed through the four output circuits and auxiliary power circuit. The FPP-RNAC-8A-4C power supply is UL Listed for use in commercial fire alarm applications.
- 8 A of power
- Fully supervised outputs
- Configurable for NAC output or constant auxiliary power
- Regulated 24 VDC output (nominal) with over-current protection
- Built-in NAC patterns
Downloads
| Condition | New |
|---|---|
| Brand | Bosch |
| NDAA Compliance | No |
| Power Supply Type | Wall Mount |
| # of Outputs | 4 |
| Input Voltage | 120 VAC, 220 VAC |
| Output Voltage | 24 VDC |
| Output Current | 8.0 Amp |
| Features | UL Listed |
| Output Type | DC |
| Version | Indoor Wallmount |
| Input Voltage | 120VAC, 220VAC |
| Number of Outputs | 4 |
| Output Protection | Electronic |
| Fire Alarm Interface | Yes |
| Battery Charging | Yes |
| Power Options | 8 amp @ 24VDC |
| Certifications | FM Approved, UL |
Bosch FPP-RNAC-8A-4C | 8 A of power | Configurable for NAC output or constant auxiliary power | Built-in NAC patterns | 4 Outputs | Fire Alarm Interface. Buy Now.
8 Amps 4 Circuit SRemote Notification Appliance Circuit (RNAC) Power Supply. Use the FPP-RNAC-8A-4C power supply to add four additional notification appliance circuits to a fire alarm control panel (when connected via the option bus), or as a NAC power supply for fire-protective signaling systems (when connected directly to the NAC output). The additional notification appliance circuits can be NFPA 72, Class B (Style Y) or Class A (Style Z). This regulated power supply provides up to 8 A of power that is used to operate both continuous and intermittent loads. This 8 A of power can be distributed through the four output circuits and auxiliary power circuit. The FPP-RNAC-8A-4C power supply is UL Listed for use in commercial fire alarm applications.
- 8 A of power
- Fully supervised outputs
- Configurable for NAC output or constant auxiliary power
- Regulated 24 VDC output (nominal) with over-current protection
- Built-in NAC patterns
Downloads
| Condition | New |
|---|---|
| Brand | Bosch |
| NDAA Compliance | No |
| Power Supply Type | Wall Mount |
| # of Outputs | 4 |
| Input Voltage | 120 VAC, 220 VAC |
| Output Voltage | 24 VDC |
| Output Current | 8.0 Amp |
| Features | UL Listed |
| Output Type | DC |
| Version | Indoor Wallmount |
| Input Voltage | 120VAC, 220VAC |
| Number of Outputs | 4 |
| Output Protection | Electronic |
| Fire Alarm Interface | Yes |
| Battery Charging | Yes |
| Power Options | 8 amp @ 24VDC |
| Certifications | FM Approved, UL |
