Comnet FVT10D1EM/24vac Video Transmitter/Data Transceiver
Product Highlights
The FVT10D1EM/24vac is a video transmitter/receiver and data transceiver supports the simultaneous transmission of short haul quality 10-bit EIA RS-250C Digitally Encoded video with one bi-directional data channel plus one 10/100 Mbps fast Ethernet port. The modules are universally compatible with major CCTV camera manufacturers and supports RS232, RS422 and 2 or 4-wire RS485 data interfaces and most data protocols. It also supports "up-the-coax" data transmission from most major manufacturers.
- IEEE 802.3 compliant
- Automatic resettable fuses on all power lines
- Distances up to 30 miles (48 km)
- Status indicating LEDs provide rapid indication of critical operating parameters
- One bi-directional data channel
- One 10/100 BASE-T/TX fast Ethernet port
- Certified to the requirements of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment
- Circuit boards are conformally coated to extend humidity tolerance to condensation conditions
- Voltage transient protection on all power and signal input/output lines provides protection from power surges and other voltage transient events
- ComFit standard form factor is interchangeable between stand-alone or rack mount use
- Compatible with NTSC, PAL, or SECAM Video Standards
- 10-bit digitally encoded short-haul video transmission meets the requirements of the EIA RS-250C standard
- Standard ComFit models are hot-swappable
- Lifetime Warranty
- Electric Port Supports Auto-negotiation for Full Duplex or Half Duplex Data Throughput
Downloads
Condition | New |
---|---|
Brand | Comnet |
Item Type | Transceiver |
Signal Type | Data, Ethernet, Video |
Channels | 1 |
Data Rate | 10/100 Mbps |
Fibers Required | 1 Fiber |
Fiber Mode | Multi-mode |
Connectors | BNC, Terminal Block |
Tx Wavelength | 1310 nm |
Rx Wavelength | 1550 nm |
Max. Distance | 48 km |
Form Factor | ComFit, DIN-Rail, Rack |
The FVT10D1EM/24vac is a video transmitter/receiver and data transceiver supports the simultaneous transmission of short haul quality 10-bit EIA RS-250C Digitally Encoded video with one bi-directional data channel plus one 10/100 Mbps fast Ethernet port. The modules are universally compatible with major CCTV camera manufacturers and supports RS232, RS422 and 2 or 4-wire RS485 data interfaces and most data protocols. It also supports "up-the-coax" data transmission from most major manufacturers.
- IEEE 802.3 compliant
- Automatic resettable fuses on all power lines
- Distances up to 30 miles (48 km)
- Status indicating LEDs provide rapid indication of critical operating parameters
- One bi-directional data channel
- One 10/100 BASE-T/TX fast Ethernet port
- Certified to the requirements of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment
- Circuit boards are conformally coated to extend humidity tolerance to condensation conditions
- Voltage transient protection on all power and signal input/output lines provides protection from power surges and other voltage transient events
- ComFit standard form factor is interchangeable between stand-alone or rack mount use
- Compatible with NTSC, PAL, or SECAM Video Standards
- 10-bit digitally encoded short-haul video transmission meets the requirements of the EIA RS-250C standard
- Standard ComFit models are hot-swappable
- Lifetime Warranty
- Electric Port Supports Auto-negotiation for Full Duplex or Half Duplex Data Throughput
Downloads
Condition | New |
---|---|
Brand | Comnet |
Item Type | Transceiver |
Signal Type | Data, Ethernet, Video |
Channels | 1 |
Data Rate | 10/100 Mbps |
Fibers Required | 1 Fiber |
Fiber Mode | Multi-mode |
Connectors | BNC, Terminal Block |
Tx Wavelength | 1310 nm |
Rx Wavelength | 1550 nm |
Max. Distance | 48 km |
Form Factor | ComFit, DIN-Rail, Rack |