NVT NV-418AR Rack Mount Dual Passive Video/Audio Transceiver
Product Highlights
The NVT Model NV-418AR Dual Video/Audio Transceiver is a rack-mount passive (non-amplified) device that allows transmission of real-time monochrome or color video and audio over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.
The unparalleled interference rejection and low emissions of the Model NV-418AR allow video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant. "Up-the-coax" type signal may be sent over the same wire pair.
The NV-418AR card slides into the NV-RM15 chassis. For stand alone applications, use the NV-418A.
Applications include Security/Surveillance, Video Distribution, Video Conferencing, or Distance Learning.
- Dual Full-motion monochrome or color video and audio at distances up to: 750ft (225m) when used with another NV-418A or NV-418AR and 3,000ft (1km) when used with an active receiver such as the NV-518A or NV-518AR
- No power required
- Built-in transient protection
- Exceptional interference rejection
- Supports "up-the-coax" type control signals
- Frequency Response DC to 10 MHz
- RJ45, BNC and 1/4" TRS
- Limited lifetime warranty
Downloads
Condition | New |
---|---|
Brand | NVT |
Balun Type | Transceiver Balun |
Channels | 2 |
Features | Audio |
Type | Passive |
Rack Mountable | Yes |
Product Type | Passive Transceiver |
Channels | 2 |
Connection Type | 1/4" Audio Jack, BNC, RJ-45 |
Form | Rack Mount |
The NVT Model NV-418AR Dual Video/Audio Transceiver is a rack-mount passive (non-amplified) device that allows transmission of real-time monochrome or color video and audio over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.
The unparalleled interference rejection and low emissions of the Model NV-418AR allow video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant. "Up-the-coax" type signal may be sent over the same wire pair.
The NV-418AR card slides into the NV-RM15 chassis. For stand alone applications, use the NV-418A.
Applications include Security/Surveillance, Video Distribution, Video Conferencing, or Distance Learning.
- Dual Full-motion monochrome or color video and audio at distances up to: 750ft (225m) when used with another NV-418A or NV-418AR and 3,000ft (1km) when used with an active receiver such as the NV-518A or NV-518AR
- No power required
- Built-in transient protection
- Exceptional interference rejection
- Supports "up-the-coax" type control signals
- Frequency Response DC to 10 MHz
- RJ45, BNC and 1/4" TRS
- Limited lifetime warranty
Downloads
Condition | New |
---|---|
Brand | NVT |
Balun Type | Transceiver Balun |
Channels | 2 |
Features | Audio |
Type | Passive |
Rack Mountable | Yes |
Product Type | Passive Transceiver |
Channels | 2 |
Connection Type | 1/4" Audio Jack, BNC, RJ-45 |
Form | Rack Mount |